原创 S-20A

 2009-10-21 16:55  1242 3 3 分类: 工程师职场

Features

Up to three pneumatic tools can be simultaneously connected from a 1/2" pipe.
Lightweight and compact in size.
Easy installation and storage.
Accessory pressure gauge and drain vavle ease piping control.

Specifications

Material	Body: Aluminum Coupler: Steel (chrome-plated)
Size	Inlet	1/2" Hi coupler (400PM)
	Outlet	1/4" Hi coupler ( 20SM)
Working pressure(kg/cm²)	15
Max,pressure((kg/cm²)	20
Packing material/ operating temperature	Rubber material	Nitto symbol	Operation temperature	Remarks
	Nitrile butadiene rubber	SG	-20℃～+80℃	Standbard material
Type of connection	Inlet	Rubber hose piping connected with 400SH
	Outlet	1/4" and 3/8" rubber hose piping

Applications

	Recommended fluid	Applications
Body: Aluminum Coupler: Steel	Air	Centralized piping Manifold for pneumatic 　equipment

Flow Rate

Branching out from a
single air source changes
the flow rate depending
on the number of hoses connected. When setting
up consider air consumption
of the pneumatic tools
and the number of hoses.
<Conditions>
Fluid type:Air
Temperature:
Room temperature
Pressure: 6kg/cm²

Precaution

When using more than one outlet hose at the same time, refer to the flow rate table and select the proper pneumatic tools.

List of Line Coupler Units

Type of unit		Size	Body mounting		Accessory
Type of unit		Size	Socket	Plug	Socket	Plug	Pressure gauge (with plug)	Drain valve (with plug)
Type S unit	S-20A	1/4"	20SM 4 pieces 40SM 1 piece	400PM 1 piece	400SH 1 piece	20PH 3 pieces	1 piece	1 piece
Type S unit	S-30A	3/8"	20SM 4 pieces 40SM 1 piece	400PM 1 piece	400SH 1 piece	30PH 3 pieces	1 piece	1 piece
Type L unit	L-20A	1/4"	20SM 4 pieces 40SM 1 piece	400PM 1 piece	400SH 1 piece	20PH 3 pieces	1 piece	1 piece
Type L unit	L-30A	3/8"	20SM 4 pieces 40SM 1 piece	400PM 1 piece	400SH 1 piece	30PH 3 pieces	1 piece	1 piece