tag 标签: MRI

相关博文
  • 热度 18
    2015-3-13 21:53
    1518 次阅读|
    0 个评论
    A few weeks ago, I had a bit of a scare. It made me stop and consider, and the thought at the forefront of my mind was: "If I were to lose my left arm, how would this impact my ability to create my electronic hobby projects?"   Yes, I know that there's more to life than electronic hobby projects, but that really was the first thing that popped into my mind (and I use the term "mind" in its loosest sense LOL).   So here's how this all came about. About five months ago, I arose from my bed and meandered into the bathroom to get ready for work. Whilst brushing my teeth, I happened to notice that my left elbow was badly bruised.   When I say "badly bruised," it's hard to convey just how bad it was -- it looked as though someone had taken a sledgehammer to the little scamp. If I took my right hand and clasped the entirety of my left elbow, then that was the extent of the bruising.   I couldn't recall banging it on anything, and there wasn't any pain, but it did look pretty scary. On the other hand, bruises do tend to appear now and again, so I decided to wait and see what happened. Over the course of the following week, the bruise went through the usual color cycle -- from brown to red to purple -- and eventually it almost faded away.   But a week or so later it was back again! So I went to the doctor, who took some blood and sent it off for analysis to see if I had arthritis or anything obvious. The results came back negative, so the doctor said to wait and see if anything else happened.   Which brings us up to about a month ago, when one of the guys who works in the building where I have my office said "Your elbow is still bruised -- it's been that way for months now -- you really should have it looked at." Now, he'd had a scare with a blood clot a while back, so he's hyper-sensitive to stuff like this, but what he said made sense, so I ambled back around to my doctor's again.   This time, my doctor referred me to a left elbow specialist. Apparently there aren't as many of these around as you might expect; it seems that most elbow specialists succumb to the siren song of the more glamorous right elbow, because that's where all the adulation and money is to be made.   After examining me, the left elbow specialist said "That's funny." This made me quite proud, because I'd come to the same conclusion myself without the benefit and expense associated with years of medical training. The upshot of all this was that he set me up with an appointment for an MRI to take place on Monday (three days ago at the time of this writing). He also presented a list of possibilities, most of which had long names I didn't understand, but one of which certainly caught my attention -- I'm sure you can guess what this was.   This past weekend -- the one just before the MRI -- I spent a happy time working on my Vetinari Clock hobby project. This little rascal is based on the use of antique analog meters.   Now, if you look at this YouTube video that I just posted recently, you'll see the first elements in the wiring harness starting to appear.   Surprisingly enough, I haven't wandered off into the weeds; this is all relevant to the story at hand (no pun intended).   So I had the MRI first thing on Monday morning on the way into work. I'd forgotten how noisy those things are -- and also how they cram you in; it's lucky I'm not claustrophobic. Later that afternoon, I received a call from the nurse at the left elbow specialist's office asking if I could come in the next day because the doctor wanted to discuss the results with me in person.   Now, you can call me a "Nervous Nelly" if you wish, but this did seem to be rather enthusiastic of them -- I'm more used to weeks of delay when it comes to communications from doctors and suchlike, so same-day response made me wonder. Generally speaking, I'm a "glass half full" type of guy, but I must admit that I started wondering as to what the future held.   On Monday evening, whilst lying in bed, my mind turned to the wiring harness I'd been working on over the weekend. I don't know about you, but the inside of my head tends to be a bit chaotic, with ideas popping into existence and ricocheting around my skull with gusto and abandon.   My first thoughts were how tricky it was to do this sort of thing with two hands. Then I started going through all of the individual actions -- stripping wires, soldering contacts, gathering and bending groups of wires, restraining them with ties -- all the time pondering how one might achieve these tasks with only one arm at one's disposal.   My conclusion was that most of the tasks I take for granted would become major pains in the rear end if I tried to perform them using only one hand. On the other hand (again, no pun intended), others have surmounted far worse situations before me, so I determined that -- if the worse came to the worse -- I would learn the tricks of the trade and work my way around any obstacles.   I also thought of an episode from the classic TV series MASH -- the one where a soldier who was looking forward to a career as a concert pianist after the war lost the use of one hand. He was in despair, until one of the doctors -- Charles Winchester III as I recall, but it may have been Hawkeye -- played some recordings and/or gave the soldier some music created especially for one-handed pianists. As a follow-on from this, I also considered the real-world story involving hard rock drummer Rick Allen , who has played with Def Leppard since 1978, and who overcame the amputation of his left arm in 1985.   It also crossed my mind that sometimes even having two arms is barely sufficient for requirements. Being a big science fan, I of course thought of The Mote in God's Eye by Larry Niven and Jerry Pournelle. This is a really good "First Contact" tale in which the aliens -- called "Moties" -- have a large arm on one side of their bodies for heavier work, and two smaller arms on the other side for use in more detailed and delicate tasks.   I'm not sure if I'd like the Motie arrangement myself -- although I can see how it could be rather advantageous -- but I guess you'd get used to it over time. Actually, when you come to think about it, having two arms on each side would be quite handy (yet again, no pun intended). For example, you could be eating a meal using two of your arms to hold a knife and fork, while using your third arm to be texting on your smartphone, and still have an arm left over to scratch any itches that might arise.   Of course, should this somehow come to pass, the downside of my spontaneously growing two extra arms would be that I'd have to purchase a whole new wardrobe of Hawaiian shirts, but we digress... As it turned out, my left elbow specialist was just being ultra-efficient; he prides himself on offering way better service than you could hope to receive from a regular old right elbow practitioner. Although there is fluid in my elbow, and although we still have to track down exactly what's going on in there, the MRI has ruled out anything that would require radical surgery.   Phew! I have to say that I ended up feeling like I dodged a bullet there. But even after I discovered that everything is OK, I haven’t been able to stop thinking about how difficult it would be to cope with only one hand. All I can say is that, for those of us who still have the use of both our arms, it behooves us to take a moment to ponder just how fortunate we are.
  • 热度 27
    2015-3-12 22:21
    1444 次阅读|
    0 个评论
    I had a bit of a scare recently. It made me stop and think, and the thought at the forefront of my mind was: "If I were to lose my left arm, how would this impact my ability to create my electronic hobby projects?"   Yes, I know that there's more to life than electronic hobby projects, but that really was the first thing that popped into my mind (and I use the term "mind" in its loosest sense LOL).   So here's how this all came about. About five months ago, I arose from my bed and meandered into the bathroom to get ready for work. Whilst brushing my teeth, I happened to notice that my left elbow was badly bruised.   When I say "badly bruised," it's hard to convey just how bad it was -- it looked as though someone had taken a sledgehammer to the little scamp. If I took my right hand and clasped the entirety of my left elbow, then that was the extent of the bruising.   I couldn't recall banging it on anything, and there wasn't any pain, but it did look pretty scary. On the other hand, bruises do tend to appear now and again, so I decided to wait and see what happened. Over the course of the following week, the bruise went through the usual color cycle -- from brown to red to purple -- and eventually it almost faded away.   But a week or so later it was back again! So I went to the doctor, who took some blood and sent it off for analysis to see if I had arthritis or anything obvious. The results came back negative, so the doctor said to wait and see if anything else happened.   Which brings us up to about a month ago, when one of the guys who works in the building where I have my office said "Your elbow is still bruised -- it's been that way for months now -- you really should have it looked at." Now, he'd had a scare with a blood clot a while back, so he's hyper-sensitive to stuff like this, but what he said made sense, so I ambled back around to my doctor's again.   This time, my doctor referred me to a left elbow specialist. Apparently there aren't as many of these around as you might expect; it seems that most elbow specialists succumb to the siren song of the more glamorous right elbow, because that's where all the adulation and money is to be made.   After examining me, the left elbow specialist said "That's funny." This made me quite proud, because I'd come to the same conclusion myself without the benefit and expense associated with years of medical training. The upshot of all this was that he set me up with an appointment for an MRI to take place on Monday (three days ago at the time of this writing). He also presented a list of possibilities, most of which had long names I didn't understand, but one of which certainly caught my attention -- I'm sure you can guess what this was.   This past weekend -- the one just before the MRI -- I spent a happy time working on my Vetinari Clock hobby project. This little rascal is based on the use of antique analog meters.   Now, if you look at this YouTube video that I just posted recently, you'll see the first elements in the wiring harness starting to appear.   Surprisingly enough, I haven't wandered off into the weeds; this is all relevant to the story at hand (no pun intended).   So I had the MRI first thing on Monday morning on the way into work. I'd forgotten how noisy those things are -- and also how they cram you in; it's lucky I'm not claustrophobic. Later that afternoon, I received a call from the nurse at the left elbow specialist's office asking if I could come in the next day because the doctor wanted to discuss the results with me in person.   Now, you can call me a "Nervous Nelly" if you wish, but this did seem to be rather enthusiastic of them -- I'm more used to weeks of delay when it comes to communications from doctors and suchlike, so same-day response made me wonder. Generally speaking, I'm a "glass half full" type of guy, but I must admit that I started wondering as to what the future held.   On Monday evening, whilst lying in bed, my mind turned to the wiring harness I'd been working on over the weekend. I don't know about you, but the inside of my head tends to be a bit chaotic, with ideas popping into existence and ricocheting around my skull with gusto and abandon.   My first thoughts were how tricky it was to do this sort of thing with two hands. Then I started going through all of the individual actions -- stripping wires, soldering contacts, gathering and bending groups of wires, restraining them with ties -- all the time pondering how one might achieve these tasks with only one arm at one's disposal.   My conclusion was that most of the tasks I take for granted would become major pains in the rear end if I tried to perform them using only one hand. On the other hand (again, no pun intended), others have surmounted far worse situations before me, so I determined that -- if the worse came to the worse -- I would learn the tricks of the trade and work my way around any obstacles.   I also thought of an episode from the classic TV series MASH -- the one where a soldier who was looking forward to a career as a concert pianist after the war lost the use of one hand. He was in despair, until one of the doctors -- Charles Winchester III as I recall, but it may have been Hawkeye -- played some recordings and/or gave the soldier some music created especially for one-handed pianists. As a follow-on from this, I also considered the real-world story involving hard rock drummer Rick Allen , who has played with Def Leppard since 1978, and who overcame the amputation of his left arm in 1985.   It also crossed my mind that sometimes even having two arms is barely sufficient for requirements. Being a big science fan, I of course thought of The Mote in God's Eye by Larry Niven and Jerry Pournelle. This is a really good "First Contact" tale in which the aliens -- called "Moties" -- have a large arm on one side of their bodies for heavier work, and two smaller arms on the other side for use in more detailed and delicate tasks.   I'm not sure if I'd like the Motie arrangement myself -- although I can see how it could be rather advantageous -- but I guess you'd get used to it over time. Actually, when you come to think about it, having two arms on each side would be quite handy (yet again, no pun intended). For example, you could be eating a meal using two of your arms to hold a knife and fork, while using your third arm to be texting on your smartphone, and still have an arm left over to scratch any itches that might arise.   Of course, should this somehow come to pass, the downside of my spontaneously growing two extra arms would be that I'd have to purchase a whole new wardrobe of Hawaiian shirts, but we digress... As it turned out, my left elbow specialist was just being ultra-efficient; he prides himself on offering way better service than you could hope to receive from a regular old right elbow practitioner. Although there is fluid in my elbow, and although we still have to track down exactly what's going on in there, the MRI has ruled out anything that would require radical surgery.   Phew! I have to say that I ended up feeling like I dodged a bullet there. But even after I discovered that everything is OK, I haven’t been able to stop thinking about how difficult it would be to cope with only one hand. All I can say is that, for those of us who still have the use of both our arms, it behooves us to take a moment to ponder just how fortunate we are.
相关资源
  • 所需E币: 5
    时间: 2023-2-6 17:00
    大小: 1.19MB
    上传者: czd886
    基于机器学习算法的影像组学在MRI诊断早期股骨头坏死中的应用
  • 所需E币: 1
    时间: 2022-5-5 11:07
    大小: 1.03MB
    上传者: czd886
    5G通信平台下的新型MRI系统架构展望.
  • 所需E币: 0
    时间: 2020-12-24 16:00
    大小: 845.33KB
    上传者: samewell
    高性能数据采集系统增强数字X射线和MRI的图像
  • 所需E币: 2
    时间: 2020-6-19 22:47
    大小: 893.79KB
    上传者: Goodluck2020
    高性能数据采集系统增强数字X射线和MRI的图像.pdf
  • 所需E币: 4
    时间: 2020-1-5 21:39
    大小: 514.69KB
    上传者: 二不过三
    现代核磁共振成像(MRI)扫描仪的设计已发生了革命性的变化,这都得益于现代IC设计的一系列发展和进步。MRI等医疗成像设备虽产生一定的影响,但并不是IC发展的主要驱动因素。相反,它们是无线基础设施等行业持续发展的受益者。这种技术进步不仅提供MRI各种子系统改善性能的机会,同时也使子系统设计得以简化。MRI架构的进步使设计复杂度降低、图像质量提高图1b.作者:JimScarlett射频(RF)接收机是另一个受到新技术巨大冲击的领域。该领现代核磁共振成像(MRI)扫描仪的设计已发生了革命性的变域一直在不断变化,不同的原始设备制造商(OEM)采用不同化,这都得益于现代IC设计的一系列发展和进步。MRI等的方式完成任务。然而,一个共同发展趋势是希望能够将接医疗成像设备虽产生一定的影响,但并不是IC发展的主要驱收电子器件移至更靠近线圈组件的位置,这样做合情合理,动因素。相反,它们是无线基础设施等行业持续发展的受益如果从前置放大器到后续接收电子器件之间使用较长的同轴者。这种技术进步不仅提供MRI各种子系统改善性能的机电缆,则不仅体积庞大,而且不利于接收机的性能……
  • 所需E币: 3
    时间: 2019-12-24 22:46
    大小: 214.68KB
    上传者: 978461154_qq
    摘要:本文探讨了磁共振成像(MRI)系统的工作原理,系统利用氢原子在磁场作用下的运动形成清晰的医学图像。文中介绍了典型的磁场类型和当前高分辨率MRI系统所依赖的超导磁铁。本文还讨论了通过适当排列梯度线圈形成3D图像的过程以及它们与RF信号之间的相互作用,给出了MRI的系统原理框图。磁共振成像(MRI)Nov16,2010摘要:本文探讨了磁共振成像(MRI)系统的工作原理,系统利用氢原子在磁场作用下的运动形成清晰的医学图像。文中介绍了典型的磁场类型和当前高分辨率MRI系统所依赖的超导磁铁。本文还讨论了通过适当排列梯度线圈形成3D图像的过程以及它们与RF信号之间的相互作用,给出了MRI的系统原理框图。概述磁共振成像(MRI)系统能够提供清晰的人体组织的图像,系统检测并处理氢原子在强磁场中受到共振磁场激励脉冲的激发后所生成的信号。氢原子核的自旋运动决定了它自身的固有磁矩,在强磁场作用下,这些氢原子将定向排列。简单起见,可以把静态磁场中的氢原子核看作一条拉紧的绳子。原子核具有一个共振频率或“Larmor”频率,具体取决于本地磁场强度。如同一条绳索在外部张力作用下发生共振。在典型的1.5TMRI磁场中,氢原子的共振频率近似为64MHz。适当的磁共振激励或者是RF脉冲激励(频率等于氢原子核谐振频率)能够强制原子核磁矩部分或全部偏移到与作用磁场垂直的平面。停止RF激励后,原子核磁矩将恢复到静态磁场的状况。原子核在重新排列的过程中释放能量,发出共振频率(取决于场强)的RF信号,MRI成像系统对该信号进行检测并形成图像。MRI成像系统原理框图。关于Maxim的MRI推荐方案,请参考:china.maxim-ic.com/mri。静态磁场MRI成像需要把患者置于强磁场内,形成有序的氢原子核。通常有三种方法产生磁场:固定磁铁、磁阻(电流通过传统的线圈)、超导磁铁。固定磁铁和磁阻产生的磁场强度一般限制在0.4T以下,无法达到高分辨率图像所要求的场强。因此,大多数高分辨率成像系统采用超导磁铁。超导磁铁体积大且结构复杂,需要把线圈浸入液态氦中,使温度保持在绝对零度附近。利用上述……