第一步把安装文件放在同一个目录下
# source SETUP.SH
Copyright 1985-1999 by Cadence Design Systems Inc.
LICENSED SOFTWARE - REVERSE ASSEMBLY, REVERSE COMPILATION AND
REVERSE ENGINEERING PROHIBITED. The information contained in
this package is the proprietary property of Cadence Design Systems,
Inc., or its licensors, and may only be used in accordance with
the Cadence Design Systems license agreement under which this
package is provided.
Restricted Rights Notice to Government Users
Use duplication or disclosure by the Government is subject to
the restrictions as set forth in subparagraphs (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013. Unpublished - all rights reserved under the
copyright laws of the United States.
Cadence Design Systems, Inc.
555 River Oaks Parkway
San Jose, California 95134 USA
Located CDROM at /data/TOOL/Cadence/CadenceBaseIC5141/CDROM1
\c
Specify path of install directory \c
[OR type [RETURN] to exit]: \c
/data/ic5141( 注意文件夹必须是不存在的)
Directory /data/ic5141 does not exist. Create? [y/n]: \c
y
Creating directory /data/ic5141
\c
Setting up softload for lnx86 in /data/ic5141
\c
SoftLoad has been successfully setup in the directory:\c
/data/ic5141\c
\c
You can install or update products by running:\c
/data/ic5141/install/bin.lnx86/softload\c
Do you want to start softload? [y/n]: \c
y
Starting up SoftLoad in GUI mode \c
DISPLAY environment variable is set to :0.0\c
If you do not see the SoftLoad console \c
window or the SoftLoad ASCII menu and\c
bash seems to be hanging then kill this \c
process.\c
Set your DISPLAY environment variable to a proper\c
value and manually start SoftLoad by typing: \c
/data/ic5141/install/bin.lnx86/softload
\c
Warning: Software administration should not be done as root
because it could cause file permissions problems while
extracting software
Press [Return] to proceed, q to quit :[Return]
WELCOME TO THE
CADENCE INSTALLATION UTILITY,
SOFTLOAD 6.0
Copyright (c) 1996-1998 Cadence Design Systems, Inc. All Rights
Reserved. Unpublished -- rights reserved under the copyright laws
of the United States.
Copyright (c) 1996-1998 UNIX Systems Laboratories, Inc. Reproduced
with Permission.
THIS SOFTWARE AND ON-LINE DOCUMENTATION CONTAIN CONFIDENTIAL INFORMATION
AND TRADE SECRETS OF CADENCE DESIGN SYSTEMS, INC. USE, DISCLOSURE, OR
REPRODUCTION IS PROHIBITED WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF
CADENCE DESIGN SYSTEMS, INC.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of Commercial Computer Software -- Restricted
Rights at 48 CFR 52.227-19, as applicable.
-------------------MAIN MENU----------------------
The available options are:
1) Load Available Products
2) List Installed Products
3) Remove Installed Products
4) (unavailable option) Configure Installed Products
5) (unavailable option) Test Installed Products
6) Update Installed Products
h) Help
q) Quit
Type your choice: [ 1 ]1
CD#1 of the media set being used is required.
You must now identify where the CD-ROM is mounted.
1) Local (mounted to this machine)
2) Remote (mounted to another machine)
m) Main Menu
h) Help
Type your choice: [ 1 ]1
Specify the CD-ROM mount point
1) /cdrom
2) Other
m) Main Menu
p) Previous Menu
h) Help
Type your choice: [ 2 ] 2
Type the CD-ROM mount point: [ /data/TOOL/Cadence/CadenceBaseIC5141/CDROM1 ]
Extracting installation information from CD#1.
Do you want to view the README file?
Please press y (yes) or n (no) : n（这时说明文档的查看，个人认为没有必要）
Where is the installation information?
1) (unavailable option) Work Order
2) E-mail File
3) Tape
4) Cadence Catalog
5) Documentation Catalog
h) Help
p) Previous Menu
q) Quit
Type your choice: [ 2 ]4
Loading appropriate product installation information...
Retrieving product status...
The following products can be installed. If you do not select all
of them, you can select products by their numbers.
Product Description size(KB) status
1) On_hold: On_hold 1 available (lnx86)
2) SPECTREBASIC: Spectre(R)-Basic Advanced Circui 397489 available (lnx86)
3) TW01: Cadence(R) team design manager 354346 available (lnx86)
4) TW02: Cadence(R) team design project adminsitr 354346 available (lnx86)
5) 111: Cadence(R) Design Framework II 498710 available (lnx86)
6) 206: Virtuoso(R) Simulation Environment 529399 available (lnx86)
7) 207: Waveform 209372 available (lnx86)
8) 276: Virtuoso(R) Schematic Editor HSPICE Inter 216464 available (lnx86)
9) 300: Virtuoso(R) Layout Editor 783228 available (lnx86)
10) 302: Virtuoso(R) Schematic Layout Option 133152 available (lnx86)
11) 305: Virtuoso(R) Compactor 184848 available (lnx86)
12) 311: Virtuoso(R) Layout Editor Turbo 799537 available (lnx86)
13) 365: Dracula(R) Graphical User Interface 571676 available (lnx86)
14) 501: ModuleMaker 514810 available (lnx86)
--More--
69) 71520: Diva(R) Physical Verification and Extra 599227 available (lnx86)
70) 90001: Virtuoso(R) Multi-mode Simulation 853413 available (lnx86)
a) All of the above
n) None of the above
p) Previous Menu
Type your choice (a,n,p,1-3,2 5 9 ...):a
You have selected the following products:
1) On_hold: On_hold 1 available (lnx86)
2) SPECTREBASIC: Spectre(R)-Basic Advanced Circui 397489 available (lnx86)
3) TW01: Cadence(R) team design manager 354346 available (lnx86)
4) TW02: Cadence(R) team design project adminsitr 354346 available (lnx86)
5) 111: Cadence(R) Design Framework II 498710 available (lnx86)
6) 206: Virtuoso(R) Simulation Environment 529399 available (lnx86)
7) 207: Waveform 209372 available (lnx86)
8) 276: Virtuoso(R) Schematic Editor HSPICE Inter 216464 available (lnx86)
9) 300: Virtuoso(R) Layout Editor 783228 available (lnx86)
10) 302: Virtuoso(R) Schematic Layout Option 133152 available (lnx86)
11) 305: Virtuoso(R) Compactor 184848 available (lnx86)
12) 311: Virtuoso(R) Layout Editor Turbo 799537 available (lnx86)
13) 365: Dracula(R) Graphical User Interface 571676 available (lnx86)
14) 501: ModuleMaker 514810 available (lnx86)
15) 550: Structure Compiler 523407 available (lnx86)
16) 570: Virtuoso(R) Schematic Composer to design 412127 available (lnx86)
17) 681: Cadence(R) RC Network Reducer Option 123572 available (lnx86)
--More--
69) 71520: Diva(R) Physical Verification and Extra 599227 available (lnx86)
70) 90001: Virtuoso(R) Multi-mode Simulation 853413 available (lnx86)
Are your selections correct? [y/n] y
Generating detailed installation data...
Determining available disk space
Determining required disk space
Disk checks successful
####################################################
The following products will be installed or updated.
####################################################
111: Cadence(R) Design Framework II (lnx86,IC5141)
12141: Cadence(R) Design Framework Integrator's To (lnx86,IC5141)
14000: Preview Front-End Floorplanner System (lnx86,IC5141)
14010: Preview Basic Floorplanner System (lnx86,IC5141)
14020: Virtuoso(R) Preview (lnx86,IC5141)
14040: Preview Timing Budgeter (lnx86,IC5141)
206: Virtuoso(R) Simulation Environment (lnx86,IC5141)
207: Waveform (lnx86,IC5141)
21060: Virtuoso(R) Schematic VHDL Interface (lnx86,IC5141)
21400: Virtuoso(R) Schematic Editor Verilog(R) Int (lnx86,IC5141)
276: Virtuoso(R) Schematic Editor HSPICE Interface (lnx86,IC5141)
3000: Virtuoso(R)-XL Layout Editor (lnx86,IC5141)
300: Virtuoso(R) Layout Editor (lnx86,IC5141)
3011: Virtuoso XL Basic (lnx86,IC5141)
302: Virtuoso(R) Schematic Layout Option (lnx86,IC5141)
305: Virtuoso(R) Compactor (lnx86,IC5141)
--More--
952: Virtuoso(R) EDIF 300 Connectivity Reader/Writ (lnx86,IC5141)
953: Virtuoso(R) EDIF 300 Schematic Reader/Writer (lnx86,IC5141)
972: SDLIN (lnx86,IC5141)
974: CDLIN (lnx86,IC5141)
On_hold: On_hold (lnx86,IC5141)
SPECTREBASIC: Spectre(R)-Basic Advanced Circuit Si (lnx86,IC5141)
TW01: Cadence(R) team design manager (lnx86,IC5141)
TW02: Cadence(R) team design project adminsitrator (lnx86,IC5141)
The following media is required:
IC5141 lnx86 P/N 356-70352-0501 CDROM # 1
IC5141 lnx86 P/N 356-70352-0502 CDROM # 2
IC5141 lnx86 P/N 356-70352-0503 CDROM # 3
Press [Return] to proceed, q to quit : [Return]
Checking for IC5141 lnx86 P/N 356-70352-0501 CDROM # 1 .........
Extracting control programs .........
Updating package installation information.............................................
.........................................................................
自动安装................................................................
................................................................
Total Installation 100 % done
Checking the installed products...
Updating status of installed products...
Cleaning up...
The products you selected have now been loaded. Place your CD-ROMs
(or tapes) containing the Cadence products in a secure, yet accessible
location.
Continue the installation by configuring the products you just loaded.
Always configure licensing before configuring libraries.
From the main menu, select Configure Installed Products if it is
selectable.
For more information, see the Cadence Installation Guide.
Check the ~install/tmp/install.history file for the list of
products affected by this install.
-------------------MAIN MENU----------------------
The available options are:
1) Load Available Products
2) List Installed Products
3) Remove Installed Products
4) Configure Installed Products
5) (unavailable option) Test Installed Products
6) Update Installed Products
h) Help
q) Quit
Type your choice: [ 1 ] Q
# source SETUP.SH
Copyright 1985-1999 by Cadence Design Systems Inc.
LICENSED SOFTWARE - REVERSE ASSEMBLY, REVERSE COMPILATION AND
REVERSE ENGINEERING PROHIBITED. The information contained in
this package is the proprietary property of Cadence Design Systems,
Inc., or its licensors, and may only be used in accordance with
the Cadence Design Systems license agreement under which this
package is provided.
Restricted Rights Notice to Government Users
Use duplication or disclosure by the Government is subject to
the restrictions as set forth in subparagraphs (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013. Unpublished - all rights reserved under the
copyright laws of the United States.
Cadence Design Systems, Inc.
555 River Oaks Parkway
San Jose, California 95134 USA
Located CDROM at /data/TOOL/Cadence/CadenceBaseIC5141/CDROM1
\c
Specify path of install directory \c
[OR type [RETURN] to exit]: \c
/data/ic5141( 注意文件夹必须是不存在的)
Directory /data/ic5141 does not exist. Create? [y/n]: \c
y
Creating directory /data/ic5141
\c
Setting up softload for lnx86 in /data/ic5141
\c
SoftLoad has been successfully setup in the directory:\c
/data/ic5141\c
\c
You can install or update products by running:\c
/data/ic5141/install/bin.lnx86/softload\c
Do you want to start softload? [y/n]: \c
y
Starting up SoftLoad in GUI mode \c
DISPLAY environment variable is set to :0.0\c
If you do not see the SoftLoad console \c
window or the SoftLoad ASCII menu and\c
bash seems to be hanging then kill this \c
process.\c
Set your DISPLAY environment variable to a proper\c
value and manually start SoftLoad by typing: \c
/data/ic5141/install/bin.lnx86/softload
\c
Warning: Software administration should not be done as root
because it could cause file permissions problems while
extracting software
Press [Return] to proceed, q to quit :[Return]
WELCOME TO THE
CADENCE INSTALLATION UTILITY,
SOFTLOAD 6.0
Copyright (c) 1996-1998 Cadence Design Systems, Inc. All Rights
Reserved. Unpublished -- rights reserved under the copyright laws
of the United States.
Copyright (c) 1996-1998 UNIX Systems Laboratories, Inc. Reproduced
with Permission.
THIS SOFTWARE AND ON-LINE DOCUMENTATION CONTAIN CONFIDENTIAL INFORMATION
AND TRADE SECRETS OF CADENCE DESIGN SYSTEMS, INC. USE, DISCLOSURE, OR
REPRODUCTION IS PROHIBITED WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF
CADENCE DESIGN SYSTEMS, INC.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of Commercial Computer Software -- Restricted
Rights at 48 CFR 52.227-19, as applicable.
-------------------MAIN MENU----------------------
The available options are:
1) Load Available Products
2) List Installed Products
3) Remove Installed Products
4) (unavailable option) Configure Installed Products
5) (unavailable option) Test Installed Products
6) Update Installed Products
h) Help
q) Quit
Type your choice: [ 1 ]1
CD#1 of the media set being used is required.
You must now identify where the CD-ROM is mounted.
1) Local (mounted to this machine)
2) Remote (mounted to another machine)
m) Main Menu
h) Help
Type your choice: [ 1 ]1
Specify the CD-ROM mount point
1) /cdrom
2) Other
m) Main Menu
p) Previous Menu
h) Help
Type your choice: [ 2 ] 2
Type the CD-ROM mount point: [ /data/TOOL/Cadence/CadenceBaseIC5141/CDROM1 ]
Extracting installation information from CD#1.
Do you want to view the README file?
Please press y (yes) or n (no) : n（这时说明文档的查看，个人认为没有必要）
Where is the installation information?
1) (unavailable option) Work Order
2) E-mail File
3) Tape
4) Cadence Catalog
5) Documentation Catalog
h) Help
p) Previous Menu
q) Quit
Type your choice: [ 2 ]4
Loading appropriate product installation information...
Retrieving product status...
The following products can be installed. If you do not select all
of them, you can select products by their numbers.
Product Description size(KB) status
1) On_hold: On_hold 1 available (lnx86)
2) SPECTREBASIC: Spectre(R)-Basic Advanced Circui 397489 available (lnx86)
3) TW01: Cadence(R) team design manager 354346 available (lnx86)
4) TW02: Cadence(R) team design project adminsitr 354346 available (lnx86)
5) 111: Cadence(R) Design Framework II 498710 available (lnx86)
6) 206: Virtuoso(R) Simulation Environment 529399 available (lnx86)
7) 207: Waveform 209372 available (lnx86)
8) 276: Virtuoso(R) Schematic Editor HSPICE Inter 216464 available (lnx86)
9) 300: Virtuoso(R) Layout Editor 783228 available (lnx86)
10) 302: Virtuoso(R) Schematic Layout Option 133152 available (lnx86)
11) 305: Virtuoso(R) Compactor 184848 available (lnx86)
12) 311: Virtuoso(R) Layout Editor Turbo 799537 available (lnx86)
13) 365: Dracula(R) Graphical User Interface 571676 available (lnx86)
14) 501: ModuleMaker 514810 available (lnx86)
--More--
69) 71520: Diva(R) Physical Verification and Extra 599227 available (lnx86)
70) 90001: Virtuoso(R) Multi-mode Simulation 853413 available (lnx86)
a) All of the above
n) None of the above
p) Previous Menu
Type your choice (a,n,p,1-3,2 5 9 ...):a
You have selected the following products:
1) On_hold: On_hold 1 available (lnx86)
2) SPECTREBASIC: Spectre(R)-Basic Advanced Circui 397489 available (lnx86)
3) TW01: Cadence(R) team design manager 354346 available (lnx86)
4) TW02: Cadence(R) team design project adminsitr 354346 available (lnx86)
5) 111: Cadence(R) Design Framework II 498710 available (lnx86)
6) 206: Virtuoso(R) Simulation Environment 529399 available (lnx86)
7) 207: Waveform 209372 available (lnx86)
8) 276: Virtuoso(R) Schematic Editor HSPICE Inter 216464 available (lnx86)
9) 300: Virtuoso(R) Layout Editor 783228 available (lnx86)
10) 302: Virtuoso(R) Schematic Layout Option 133152 available (lnx86)
11) 305: Virtuoso(R) Compactor 184848 available (lnx86)
12) 311: Virtuoso(R) Layout Editor Turbo 799537 available (lnx86)
13) 365: Dracula(R) Graphical User Interface 571676 available (lnx86)
14) 501: ModuleMaker 514810 available (lnx86)
15) 550: Structure Compiler 523407 available (lnx86)
16) 570: Virtuoso(R) Schematic Composer to design 412127 available (lnx86)
17) 681: Cadence(R) RC Network Reducer Option 123572 available (lnx86)
--More--
69) 71520: Diva(R) Physical Verification and Extra 599227 available (lnx86)
70) 90001: Virtuoso(R) Multi-mode Simulation 853413 available (lnx86)
Are your selections correct? [y/n] y
Generating detailed installation data...
Determining available disk space
Determining required disk space
Disk checks successful
####################################################
The following products will be installed or updated.
####################################################
111: Cadence(R) Design Framework II (lnx86,IC5141)
12141: Cadence(R) Design Framework Integrator's To (lnx86,IC5141)
14000: Preview Front-End Floorplanner System (lnx86,IC5141)
14010: Preview Basic Floorplanner System (lnx86,IC5141)
14020: Virtuoso(R) Preview (lnx86,IC5141)
14040: Preview Timing Budgeter (lnx86,IC5141)
206: Virtuoso(R) Simulation Environment (lnx86,IC5141)
207: Waveform (lnx86,IC5141)
21060: Virtuoso(R) Schematic VHDL Interface (lnx86,IC5141)
21400: Virtuoso(R) Schematic Editor Verilog(R) Int (lnx86,IC5141)
276: Virtuoso(R) Schematic Editor HSPICE Interface (lnx86,IC5141)
3000: Virtuoso(R)-XL Layout Editor (lnx86,IC5141)
300: Virtuoso(R) Layout Editor (lnx86,IC5141)
3011: Virtuoso XL Basic (lnx86,IC5141)
302: Virtuoso(R) Schematic Layout Option (lnx86,IC5141)
305: Virtuoso(R) Compactor (lnx86,IC5141)
--More--
952: Virtuoso(R) EDIF 300 Connectivity Reader/Writ (lnx86,IC5141)
953: Virtuoso(R) EDIF 300 Schematic Reader/Writer (lnx86,IC5141)
972: SDLIN (lnx86,IC5141)
974: CDLIN (lnx86,IC5141)
On_hold: On_hold (lnx86,IC5141)
SPECTREBASIC: Spectre(R)-Basic Advanced Circuit Si (lnx86,IC5141)
TW01: Cadence(R) team design manager (lnx86,IC5141)
TW02: Cadence(R) team design project adminsitrator (lnx86,IC5141)
The following media is required:
IC5141 lnx86 P/N 356-70352-0501 CDROM # 1
IC5141 lnx86 P/N 356-70352-0502 CDROM # 2
IC5141 lnx86 P/N 356-70352-0503 CDROM # 3
Press [Return] to proceed, q to quit : [Return]
Checking for IC5141 lnx86 P/N 356-70352-0501 CDROM # 1 .........
Extracting control programs .........
Updating package installation information.............................................
.........................................................................
自动安装................................................................
................................................................
Total Installation 100 % done
Checking the installed products...
Updating status of installed products...
Cleaning up...
The products you selected have now been loaded. Place your CD-ROMs
(or tapes) containing the Cadence products in a secure, yet accessible
location.
Continue the installation by configuring the products you just loaded.
Always configure licensing before configuring libraries.
From the main menu, select Configure Installed Products if it is
selectable.
For more information, see the Cadence Installation Guide.
Check the ~install/tmp/install.history file for the list of
products affected by this install.
-------------------MAIN MENU----------------------
The available options are:
1) Load Available Products
2) List Installed Products
3) Remove Installed Products
4) Configure Installed Products
5) (unavailable option) Test Installed Products
6) Update Installed Products
h) Help
q) Quit
Type your choice: [ 1 ] Q
EE直播间
更多
-
提升毫米波信号测试精度 直播时间： 12月18日 14:00 -
EE Talk主题专访系列直播-对话：释放 Wi-Fi 7 在高带宽应用中的技术潜力 直播时间： 12月19日 10:00
关闭
站长推荐
/2 
/2
文章评论（0条评论）
登录后参与讨论