原创 代理销售意大利FIM VALVOLE阀

厦门盈鑫公司代理销售-意大利Fim Valvole 阀门

  Direct operated solenoid valve differs from other types for its minimum overall dimensions.
Its specific design allows single or gang mounting in narrow spaces.
Its high switching speed and flow rate make this small valve suitable for different applications also with other fluids than compressed air compatible with constructive material.
All version, equipped with manual override, are 3/2 ways N.C. and N.O., 2/2 ways N.C. 12 or 24 Volt D.C. with cables or connector also with led, surge suppressor etc...

 Fim Valvole 10mm阀门：

Electrical part: Miniature solenoid consisting of a coil made of copper wire of different sizes depending on the voltage. Insulated according to F class standards and injection-moulded nylon-glass application. All parts forming the cladding, the electrical connections and the pole pieces are protected against corrosion.
Electrical connection is by connector or directly with flying leads.

Mechanical part:
AISI 430F cores, AISI 302 return springs, NBR or VITON seals, nylon body.

The miniature solenoid valves are mounted on a separate base, multiple base or distributors.

Technical Caracteristics

Fim Valvole 15mm阀门：

This direct operated solenoid valve has minimum overall dimensions (15 mm wide). Its construction method is same as 10 mm valve.
It is suitable to be single or gang mounted or as electro-operator for large air flow distributors.
Can be utilized with compressed air and other fluids compatible with material used to build the solenoid valve. The available versions, all equipped with manual override, are 3 ways, normally closed and normally open with DC and AC 50/60 Hz. It抯 possible to install the N.O. valve on N.C. interface by using the registered reverse system included in the valve body. The electrical connection is made with cables (300 mm.), faston or with connector. This type of miniature solenoid valve is interchangeble with most of the same products available on the market. Coil can be also positioned at 180° to get the electrical connection located on the opposite side than override.

Electrical part:
Miniature solenoid consisting of a coil made of copper wire of different diameters depending on the voltage, isolated according to 揊?class standard, with injection-moulded nylon-glass application.
All parts forming the cladding, the electrical connections and the pole pieces are

protected against corrosion.

Mechanical part:
AISI 430F cores, AISI 302 return springs, NBR seals, nylon body.