原创 AT91SAM9261 SDRAM 133 MHz Core 266 MHz

 2009-3-21 19:08  3233 5 5 分类: MCU/ 嵌入式

// ---------------------------------------------------------
// ATMEL Microcontroller Software Support - ROUSSET -
// ---------------------------------------------------------
// The software is delivered "AS IS" without warranty or
// condition of any kind, either express, implied or
// statutory. This includes without limitation any warranty
// or condition with respect to merchantability or fitness
// for any particular purpose, or against the infringements of
// intellectual property rights of others.
// ---------------------------------------------------------
// File: SAM9_SDRAM.mac
// User setup file for CSPY debugger.
// 1.1 08/Aug/06 jpp : Creation
//
// $Revision: 26510 $
//
// ---------------------------------------------------------
__var __mac_i;
__var __mac_pt;

/*********************************************************************
*
*       execUserReset() : JTAG set initially to Full Speed
*/
execUserReset()
{
    __message "------------------------------ execUserReset ---------------------------------";
    _MapRAMAt0();                       //* Set the RAM memory at 0x00300000 & 0x00000000
    __PllSetting();                     //* Init PLL
    __PllSetting100MHz();
    __message "-------------------------------Set PC Reset ----------------------------------";
}

/*********************************************************************
*
*       execUserPreload() : JTAG set initially to 32kHz
*/
execUserPreload()
{
    __message "------------------------------ execUserPreload ---------------------------------";
    __hwReset(0);                     //* Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
    __writeMemory32(0xD3,0x98,"Register"); //* Set CPSR
    __PllSetting();                   //* Init PLL
    __PllSetting100MHz();
    __initSDRAM();                    //* Init SDRAM before load
    _MapRAMAt0();                     //* Set the RAM memory at 0x0020 0000 & 0x0000 0000
    _InitRSTC();                      //* Enable User Reset to allow execUserReset() execution
}

/*********************************************************************
*
*       _InitRSTC()
*
* Function description
*   Initializes the RSTC (Reset controller).
*   This makes sense since the default is to not allow user resets, which makes it impossible to
*   apply a second RESET via J-Link
*/
_InitRSTC() {
    __writeMemory32(0xA5000001, 0xFFFFFD08,"Memory");    // Allow user reset
}

/*********************************************************************
*
*       __initSDRAM()
* Function description
* Set SDRAM for works at 100 MHz
*/
__initSDRAM()
{
//* Configure EBI Chip select
//    pCCFG->CCFG_EBICSA |= AT91C_EBI_CS1A_SDRAMC;
// AT91C_CCFG_EBICSA ((AT91_REG *) 0xFFFFEF1C) // (CCFG) EBI Chip Select Assignement Register
    __writeMemory32(0x0001003A,0xFFFFEE30,"Memory");

//* Configure PIOs
//* AT91F_PIO_CfgPeriph( AT91C_BASE_PIOC, AT91C_PC16_D16 to AT91C_PC16_D31
// pPio->PIO_ASR = periphAEnable; AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) // (PIOC) Select A Register
// pPio->PIO_BSR = periphBEnable;AT91C_PIOC_BSR ((AT91_REG *) 0xFFFFF874) // (PIOC) Select B Register
// pPio->PIO_PDR = (periphAEnable | periphBEnable); // Set in Periph mode
    __writeMemory32(0xFFFF0000,0xFFFFF870,"Memory");
    __writeMemory32(0x00000000,0xFFFFF874,"Memory");
    __writeMemory32(0xFFFF0000,0xFFFFF804,"Memory");

//* psdrc->SDRAMC_CR = AT91C_SDRAMC_NC_9 | AT91C_SDRAMC_NR_13 | AT91C_SDRAMC_CAS_2 |
// AT91C_SDRAMC_NB_4_BANKS | AT91C_SDRAMC_DBW_32_BITS | AT91C_SDRAMC_TWR_2 | AT91C_SDRAMC_TRC_7 |
// AT91C_SDRAMC_TRP_2 | AT91C_SDRAMC_TRCD_2 | AT91C_SDRAMC_TRAS_5 | AT91C_SDRAMC_TXSR_8 ;
//    __writeMemory32(0x85227259,0xFFFFEA08,"Memory");
    __writeMemory32(0xA6339279,0xFFFFEA08,"Memory");

__sleep(100);
//* psdrc->SDRAMC_MR = 0x00000002;  // Set PRCHG AL
    __writeMemory32(0x00000002,0xFFFFEA00,"Memory");
//* *AT91C_SDRAM = 0x00000000;   // Perform. PRCHG
    __writeMemory32(0x00000000,0x20000000,"Memory");
__sleep(100);

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 1st CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");

//* *(AT91C_SDRAM+4) = 0x00000001; // Perform. CBR
__writeMemory32(0x00000001,0x20000010,"Memory");

//* psdrc->SDRAMC_MR = 0x00000004;  // Set 2 CBR
     __writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+8) = 0x00000002; // Perform. CBR
     __writeMemory32(0x00000002,0x20000020,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD;  // Set 3 CBR
      __writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0xc) = 0x00000003; // Perform. CBR
     __writeMemory32(0x00000003,0x20000030,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD;  // Set 4 CBR
      __writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x10) = 0x00000004; // Perform. CBR
     __writeMemory32(0x00000004,0x20000040,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD;  // Set 5 CBR
      __writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x14) = 0x00000005; // Perform. CBR
     __writeMemory32(0x00000005,0x20000050,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD;  // Set 6 CBR
      __writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x18) = 0x00000006; // Perform. CBR
     __writeMemory32(0x00000006,0x20000060,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD;  // Set 7 CBR
      __writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x1c) = 0x00000007; // Perform. CBR
     __writeMemory32(0x00000007,0x20000070,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD;  // Set 8 CBR
      __writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x20) = 0x00000008; // Perform. CBR
     __writeMemory32(0x00000008,0x20000080,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_LMR_CMD;  // Set LMR operation
      __writeMemory32(0x00000003,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x24) = 0xcafedede;  // Perform. LMR burst="1", lat="2"
     __writeMemory32(0xCAFEDEDE,0x20000090,"Memory");

//* psdrc->SDRAMC_TR = (AT91C_MASTER_CLOCK * 7)/1000000; // Set Refresh Timer 390 for 25MHz (TR= 15.6 * F )
// // (F : system clock freq. MHz

__writeMemory32(0x000002b7,0xFFFFEA04,"Memory");

//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_NORMAL_CMD; // Set Normal mode
__writeMemory32(0x00000000,0xFFFFEA00,"Memory");

//* *AT91C_SDRAM = 0x00000000; // Perform. Normal mode
__writeMemory32(0x00000000,0x20000000,"Memory");
__message "------------------------------- SDRAM Done at 133 MHz -------------------------------";

}

/*********************************************************************
*
*       _MapRAMAt0()
* Function description
* Remap RAM at 0
*/
_MapRAMAt0()
{
__var hold;
// ******************************************************
// Test and set Remap
// ******************************************************
hold = __readMemory32(0x00000000,"Memory");
__writeMemory32(0xAAAAAAAA,0x00000000,"Memory");
if(__readMemory32(0x00000000,"Memory") != 0xAAAAAAAA)
{
    __writeMemory32(0x03,0xFFFFEE00,"Memory");    // toggle remap bits
}
else
{
    __writeMemory32(hold,0x00000000,"Memory");
}
}

/*********************************************************************
*
*       __PllSetting()
* Function description
*   Initializes the PMC.
*   1. Enable the Main Oscillator
*   2. Configure PLL
*   3. Switch Master
*/
__PllSetting()
{
     if ((__readMemory32(0xFFFFFC30,"Memory")&0x3) != 0 ) {
//* Disable all PMC interrupt ( $$ JPP)
//* AT91C_PMC_IDR   ((AT91_REG *) 0xFFFFFC64) //(PMC) Interrupt Disable Register
//*    pPmc->PMC_IDR = 0xFFFFFFFF;
    __writeMemory32(0xFFFFFFFF,0xFFFFFC64,"Memory");
//* AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) //(PMC) Peripheral Clock Disable Register
    __writeMemory32(0xFFFFFFFF,0xFFFFFC14,"Memory");
// Disable all clock only Processor clock is enabled.
    __writeMemory32(0xFFFFFFFE,0xFFFFFC04,"Memory");

// AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register
__writeMemory32(0x00000001,0xFFFFFC30,"Memory");
__sleep(10000);

// write reset value to PLLA and PLLB
// AT91C_PMC_PLLAR ((AT91_REG *) 0xFFFFFC28) // (PMC) PLL A Register
    __writeMemory32(0x00003F00,0xFFFFFC28,"Memory");

// AT91C_PMC_PLLBR ((AT91_REG *) 0xFFFFFC2C) // (PMC) PLL B Register
__writeMemory32(0x00003F00,0xFFFFFC2C,"Memory");
__sleep(10000);

   __message "------------------------------- PLL Enable -----------------------------------------";
   } else {
   __message " ********* Core in SLOW CLOCK mode ********* "; }
}

/*********************************************************************
*
* __PllSetting100MHz()
* Function description
* Set core at 266 MHz and MCK at 133 MHz
* 133120000 * 2 = 266240000
*/
__PllSetting100MHz()
{

__message "------------------------------- PLL Set at 133 MHz ----------------------------------";

//* pPmc->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x40 <<8) | AT91C_CKGR_MOSCEN ));
    __writeMemory32(0x00004001,0xFFFFFC20,"Memory");
    __sleep(10000);
// AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register
    __writeMemory32(0x00000001,0xFFFFFC30,"Memory");
    __sleep(10000);
//*   AT91C_BASE_CKGR->CKGR_PLLAR = (AT91C_CKGR_SRCA | ((96 << 16) & AT91C_CKGR_MULA) |
//    (AT91C_CKGR_PLLACOUNT | (AT91C_CKGR_OUTA_0 | (9);
//    __writeMemory32(0x2060BF09,0xFFFFFC28,"Memory");
    __writeMemory32(0x2081BF09,0xFFFFFC28,"Memory");
    __sleep(10000);


// AT91C_BASE_PMC->PMC_PLLBR = BOARD_USBDIV| BOARD_CKGR_PLLB | BOARD_PLLBCOUNT | BOARD_MULB| BOARD_DIVB;
    __writeMemory32(0x20813F0C,0xFFFFFC2C,"Memory");
   __sleep(10000);
//*   AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2;;
    __writeMemory32(0x00000102,0xFFFFFC30,"Memory");
     __sleep(10000);

}

/// Frequency of the board main oscillator.
#define BOARD_MAINOSC 18432000

/// Master clock frequency (when using board_lowlevel.c).
#define BOARD_MCK               133120000   //((18432000 * 97 / 9) / 2)
//------------------------------------------------------------------------------
#define BOARD_OSCOUNT           (AT91C_CKGR_OSCOUNT & (64 << 8))
#define BOARD_CKGR_PLLA         (AT91C_CKGR_SRCA | AT91C_CKGR_OUTA_2)
#define BOARD_PLLACOUNT         (63 << 8)

//#define BOARD_MULA (AT91C_CKGR_MULA & (96 << 16))
//#define BOARD_DIVA (AT91C_CKGR_DIVA & 9)

#define BOARD_MULA (AT91C_CKGR_MULA & (129 << 16))
#define BOARD_DIVA (AT91C_CKGR_DIVA & 9)

#define BOARD_PRESCALER AT91C_PMC_MDIV_2

#define BOARD_USBDIV            AT91C_CKGR_USBDIV_2
#define BOARD_CKGR_PLLB         AT91C_CKGR_OUTB_0
#define BOARD_PLLBCOUNT         BOARD_PLLACOUNT
#define BOARD_MULB              (124 << 16)
#define BOARD_DIVB              12