原创 SD-18MS SD-18MSB SD-18MSP直流三线接近开关

 2009-4-18 11:15  1846 4 4 分类: 工业电子

SPECIFICATIONS

Outer shape		Model	Sensing distance(m/m)	Output	Response frequency	Power source
18?		SD-18MS	5	NPN NO	350?	DC 10~30V

● ORDERING INFORMATION交流接近开关电容式接近开关 SD-18MS SD-18MSB SD-18MSP直流三线接近开关直流两线接近开关接近传感器放大器光电开关接近开关光电传感器接近传感器光纤传感器光纤放大器光纤开关电抗器变压器sanil韩国山一 SANIL韩国三一 SANIL ELECTRIC CO.,LTD

Model		SD-18MS
Shape		Shield
Setting distance(Rated)		5㎜±10%
Setting distence(Actual)		0~3.5㎜
Standard target		Iron 18×18×t1㎜
Hysteresis		Less than 10% of the rated sensing distance
Power source		12~24V DC±10% (10~30V DC Ripple p-p Less than 10%)
Current consumption		Less than 15?
Output	Load current	200?
	Residual voltage	Less than 1.5V(24V DC in power ON state at 200?)
Protection circuit		Surge protection circuit, Overload & short circuit protection
Max. response frequency		350Hz
Environmental Resistance	Ambient temperature	-25 to +70℃, storage:-25~*80℃(Non-freezing condition)
	Protection	IP67(IEC Specification)
Cable		Oil,heat and cold resistant cable Cable type:cable with 2m *Connector type:cable SD-3I5, SD-3L5
Accessories

?OUTLINE DIMENSIONS

Model	Shield type
SD-18MS

?Sensing Fields(Typical)

If detecting target with a smaller size than the standard target, the sensing distance will become shorter.

?Sensors Embebed in Metal

If the sensor is completely embeded in metal, its sensing distance may decrease thus it shall be established with the following values as shown at Table1.

(Table 1.)

(Unit ㎜)

	Non-Shield			Shield
	S□□-12M□ (8M)	S□□-18M□	S□□-30M□	S□□-12MS□ (8MS)	S□□-18MS□	S□□-30MS□
C	15(8)	22	30	0	0	0
D	36(24)	54	90	12(8)	18	30
E	20(6)	40	70	8(4.5)	20	40
F	40(24)	70	90	18(12)	27	45