原创 ALLEGRO封装尺寸生成器!!!

好像生成的封装都比较大，可否解释一下

15.1软件也太老了吧.换下试试.

什么烂东西呀

我用的15.1的,生成的库都没有盘

是不是软件有问题。。。

把软件重新装下。。。另外把版本升级到15。5以上。试试，。

我的封装生成器用 的时候怎么老是报错啊

元器件封装无法生成

显示如下:Starting new drawing...
Grids are drawn 400.0, 400.0 apart for enhanced viewability.
Starting new drawing...
Grids are drawn 400.0, 400.0 apart for enhanced viewability.
Grids are drawn 10.160, 10.160 apart for enhanced viewability.
Performing DRC. Please wait...
No DRC errors detected.
E- No command active
W- Scaled value has been rounded off.
Grids are drawn 6.400, 6.400 apart for enhanced viewability.
Loading axlcore.cxt
Creating shape symbol 'c:\MYSYM\srx0_95y0_70r0_10.ssm'.
Starting Create symbol...
create_sym completed successfully - use Viewlog to review the log file.
Symbol 'c:\MYSYM\srx0_95y0_70r0_10.ssm' created.
W- Small extents, sector size decreased to: 508,508
E- *Error* eval: undefined function - axlDBGetShapes
E- *Error* load: error while loading file - "c:\\FPM\\fpm.il"
ERROR
t

麻烦楼主帮忙分析下啊?

万分感谢!