原创 [博客大赛][原创]ADSP-BF533-STAMP快速入手

2012-4-8 22:29 966 7 8 分类: FPGA/CPLD

发现我考博以后英语水平有所长进哇,今天晚上对照着英文版的ADSP-BF533说明书,就完成了初始化,安逸,很有成见感,发现很少有人写关于ADSP-BF533的入手说明的,今天我简单写一下,希望对新手有所帮助。

This kit contains the ADSP-BF533 STAMP board, a universal 7.5V DC power supply (with US power cord), the uClinux for the ADSP-BF533 Processor CD and this document.

工作电压:7.5V,使用操作系统:uClinux

Getting started

  1. Connect the serial port to your host computer from the STAMP board.使用ADSP-BF533的串口连接主机
  2. Connect the Ethernet cable to your local network from the STAMP board.使用你的主机网口连接ADSP-BF533
  3. Start a terminal emulation program (Minicom or HyperTerminal) on your host computer. From the configuration menu set the serial port connection for:开始端口测试模拟,从你的主机串口调试工具启动(强调一下,这个是我们电脑上都有的,点击左下角的开始,附件,通讯,超级终端,下面是在超级终端中的选项)
    • 57600 baud 8 data bits
    • parity none
    • 1 stop bit
    • h/w flow control off
  4. Connect the dc power input and power up the board.上电
  5. After the STAMP board powers up you should see a U-Boot start-up screen on your terminal window. At this stage if you allow the boot timer to count down the board will load the uClinux kernel out of flash and boot the kernel and you will be brought to the command shell.启动Uboot,会在你的超级终端跳出一段英文。
  1. Install the GCC tools on your machine (as root):安装Gcc工具在你的主机,下面是操作系统中的命令。
	bash# rpm -ivh bfin-elf-3.4-beta.i386.rpm 

- In user mode export the path for the tools:

	bash> export PATH=/opt/uClinux/bfin/bin:$PATH 

The toolchain can also be compiled from source by executing the build script that is located in the scripts directory. Extract all of the files to a local directory as well as the build script and modify the script to point to your directory structure. After the script has executed, export the path to point to your new tool chain output directory.

Linux uClinux Kernel Install

  1. Copy the kernel source to your work directory 复制内核程序到你的工作文件
  2. Uncompress the kernel:解压缩,以下是代码
	bunzip2 uClinux-dist.tar.bz2
    tar -xvf uClinux-dist.tar
    cd uClinux-dist

 呵呵,可以play了,这个是最基本的入门,但是很重要,需有问题的朋友可以跟我交流!!!

PARTNER CONTENT

文章评论1条评论)

登录后参与讨论

用户403208 2012-4-11 10:53

很实用,推荐
相关推荐阅读
用户404002 2013-08-15 11:26
【博客大赛】基于嵌入式系统的双网卡的虚拟机ubuntu配置
  因为经常用嵌入式系统,不方便上网调试,所以给我的电脑加了一块网卡,加好后希望能设置双IP,互相绑定进行上网,但是实际操作起来一直上不了,特地把我的操作过程写出来,其中参考了华清的一位老师的...
用户404002 2012-09-21 18:38
[博客大赛]基于ADI Blackfin内核的无线遥控接收模块模块应用
学而不思则罔,思而不学则殆。我在chinaaet经常写一写嵌入式方面的东西,被朋友邀请参加EDN的竞赛,把我新近发表在上面的一篇原创文章发出来与大家分享。 上午一直忙于调一个程序,忙...
我要评论
1
7
关闭 站长推荐上一条 /3 下一条