原创 开通一个博客,不忘记老博客

要使用NIOSII/f 构建内核。

博主你好，我想问一下你的硬件系统中使用的处理器是哪一种？我是使用NiosII/e处理器构建的系统，make的时候出现错误：include/net/sock.h:591: error: size of array `__pad' is too large 当我该用NiosII/s或NiosII/f处理器后，可以make，也可以生成zImage文件，但下载zImage文件的时候又出现以下错误： Downloading 00800000 ( 0%) Downloading 01401020 (93%) Downloaded 5KB in 0.1s Verifying 00800000 ( 0%) Verify failed between address 0x800000 and 0x8011F7 Leaving target processor paused 期待您的回复！

不错，值得参考

re fengliuleo： 你看看你的ptf文件是不是放在/home/leo/uClinux/uc.ptf，还要看以下这个文件的权限是不是可读写的。

博主，我在make vendor_hwselect SYSPTF=/home/leo/uClinux/uc.ptf时候出现了下面的错误RUNNING hwselect ERROR: Could not open SYSTEM ptf file.烦请楼主帮忙

博主，我在make vendor_hwselect SYSPTF=/home/leo/uClinux/uc.ptf时候出现了下面的错误 make[3]: Entering directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' RUNNING hwselect ERROR: Could not open SYSTEM ptf file. 烦请楼主帮忙

博主，我在make vendor_hwselect SYSPTF=/home/leo/uClinux/uc.ptf时候出现了下面的错误” make[3]: Entering directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' RUNNING hwselect ERROR: Could not open SYSTEM ptf file. 烦请楼主帮忙

博主，我在make vendor_hwselect SYSPTF=/home/leo/uClinux/uc.ptf时候出现了下面的错误” make[3]: Entering directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' RUNNING hwselect ERROR: Could not open SYSTEM ptf file. make[3]: Leaving directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' 烦请楼主帮忙

博主，我在make vendor_hwselect SYSPTF=/home/leo/uClinux/uc.ptf时候出现了下面的错误” make[3]: Entering directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' RUNNING hwselect ERROR: Could not open SYSTEM ptf file. make[3]: Leaving directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' make[2]: Leaving directory `/home/leo/uClinux/uClinux-dist/vendors/Altera/nios2nommu' make[1]: Leaving directory `/home/leo/uClinux/uClinux-dist/vendors' root@leo-desktop:/home/leo/uClinux/uClinux-dist# root@leo-desktop:/home/leo/uClinux/uClinux-dist# “ 烦请楼主帮忙

博主，我在make vendor_hwselect SYSPTF=/home/leo/uClinux/System-files/sls_neek_bsp_hw_sopc.ptf时候出现了下面的错误” make[3]: Entering directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' RUNNING hwselect ERROR: Could not open SYSTEM ptf file. make[3]: Leaving directory `/home/leo/uClinux/uClinux-dist/linux-2.6.x' make[2]: Leaving directory `/home/leo/uClinux/uClinux-dist/vendors/Altera/nios2nommu' make[1]: Leaving directory `/home/leo/uClinux/uClinux-dist/vendors' root@leo-desktop:/home/leo/uClinux/uClinux-dist# root@leo-desktop:/home/leo/uClinux/uClinux-dist# “ 烦请楼主帮忙