CME ERROR's (GSM Equipment related codes)

Error Description

CME ERROR: 0 Phone failure

CME ERROR: 1 No connection to phone

CME ERROR: 2 Phone adapter link reserved

CME ERROR: 3 Operation not allowed

CME ERROR: 4 Operation not supported

CME ERROR: 5 PH_SIM PIN required

CME ERROR: 6 PH_FSIM PIN required

CME ERROR: 7 PH_FSIM PUK required

CME ERROR: 10 SIM not inserted

CME ERROR: 11 SIM PIN required

CME ERROR: 12 SIM PUK required

CME ERROR: 13 SIM failure

CME ERROR: 14 SIM busy

CME ERROR: 15 SIM wrong

CME ERROR: 16 Incorrect password

CME ERROR: 17 SIM PIN2 required

CME ERROR: 18 SIM PUK2 required

CME ERROR: 20 Memory full

CME ERROR: 21 Invalid index

CME ERROR: 22 Not found

CME ERROR: 23 Memory failure

CME ERROR: 24 Text string too long

CME ERROR: 25 Invalid characters in text string

CME ERROR: 26 Dial string too long

CME ERROR: 27 Invalid characters in dial string

CME ERROR: 30 No network service

CME ERROR: 31 Network timeout

CME ERROR: 32 Network not allowed, emergency calls only

CME ERROR: 40 Network personalization PIN required

CME ERROR: 41 Network personalization PUK required

CME ERROR: 42 Network subset personalization PIN required

CME ERROR: 43 Network subset personalization PUK required

CME ERROR: 44 Service provider personalization PIN required

CME ERROR: 45 Service provider personalization PUK required

CME ERROR: 46 Corporate personalization PIN required

CME ERROR: 47 Corporate personalization PUK required

CME ERROR: 48 PH-SIM PUK required

CME ERROR: 100 Unknown error

CME ERROR: 103 Illegal MS

CME ERROR: 106 Illegal ME

CME ERROR: 107 GPRS services not allowed

CME ERROR: 111 PLMN not allowed

CME ERROR: 112 Location area not allowed

CME ERROR: 113 Roaming not allowed in this location area

CME ERROR: 126 Operation temporary not allowed

CME ERROR: 132 Service operation not supported

CME ERROR: 133 Requested service option not subscribed

CME ERROR: 134 Service option temporary out of order

CME ERROR: 148 Unspecified GPRS error

CME ERROR: 149 PDP authentication failure

CME ERROR: 150 Invalid mobile class

CME ERROR: 256 Operation temporarily not allowed

CME ERROR: 257 Call barred

CME ERROR: 258 Phone is busy

CME ERROR: 259 User abort

CME ERROR: 260 Invalid dial string

CME ERROR: 261 SS not executed

CME ERROR: 262 SIM Blocked

CME ERROR: 263 Invalid block

CME ERROR: 772 SIM powered down

CMS ERROR's (GSM Network related codes)

Error Description

CMS ERROR: 1 Unassigned number

CMS ERROR: 8 Operator determined barring

CMS ERROR: 10 Call bared

CMS ERROR: 21 Short message transfer rejected

CMS ERROR: 27 Destination out of service

CMS ERROR: 28 Unindentified subscriber

CMS ERROR: 29 Facility rejected

CMS ERROR: 30 Unknown subscriber

CMS ERROR: 38 Network out of order

CMS ERROR: 41 Temporary failure

CMS ERROR: 42 Congestion

CMS ERROR: 47 Recources unavailable

CMS ERROR: 50 Requested facility not subscribed

CMS ERROR: 69 Requested facility not implemented

CMS ERROR: 81 Invalid short message transfer reference value

CMS ERROR: 95 Invalid message unspecified

CMS ERROR: 96 Invalid mandatory information

CMS ERROR: 97 Message type non existent or not implemented

CMS ERROR: 98 Message not compatible with short message protocol

CMS ERROR: 99 Information element non-existent or not implemente

CMS ERROR: 111 Protocol error, unspecified

CMS ERROR: 127 Internetworking , unspecified

CMS ERROR: 128 Telematic internetworking not supported

CMS ERROR: 129 Short message type 0 not supported

CMS ERROR: 130 Cannot replace short message

CMS ERROR: 143 Unspecified TP-PID error

CMS ERROR: 144 Data code scheme not supported

CMS ERROR: 145 Message class not supported

CMS ERROR: 159 Unspecified TP-DCS error

CMS ERROR: 160 Command cannot be actioned

CMS ERROR: 161 Command unsupported

CMS ERROR: 175 Unspecified TP-Command error

CMS ERROR: 176 TPDU not supported

CMS ERROR: 192 SC busy

CMS ERROR: 193 No SC subscription

CMS ERROR: 194 SC System failure

CMS ERROR: 195 Invalid SME address

CMS ERROR: 196 Destination SME barred

CMS ERROR: 197 SM Rejected-Duplicate SM

CMS ERROR: 198 TP-VPF not supported

CMS ERROR: 199 TP-VP not supported

CMS ERROR: 208 D0 SIM SMS Storage full

CMS ERROR: 209 No SMS Storage capability in SIM

CMS ERROR: 210 Error in MS

CMS ERROR: 211 Memory capacity exceeded

CMS ERROR: 212 Sim application toolkit busy

CMS ERROR: 213 SIM data download error

CMS ERROR: 255 Unspecified error cause

CMS ERROR: 300 ME Failure

CMS ERROR: 301 SMS service of ME reserved

CMS ERROR: 302 Operation not allowed

CMS ERROR: 303 Operation not supported

CMS ERROR: 304 Invalid PDU mode parameter

CMS ERROR: 305 Invalid Text mode parameter

CMS ERROR: 310 SIM not inserted

CMS ERROR: 311 SIM PIN required

CMS ERROR: 312 PH-SIM PIN required

CMS ERROR: 313 SIM failure

CMS ERROR: 314 SIM busy

CMS ERROR: 315 SIM wrong

CMS ERROR: 316 SIM PUK required

CMS ERROR: 317 SIM PIN2 required

CMS ERROR: 318 SIM PUK2 required

CMS ERROR: 320 Memory failure

CMS ERROR: 321 Invalid memory index

CMS ERROR: 322 Memory full

CMS ERROR: 330 SMSC address unknown

CMS ERROR: 331 No network service

CMS ERROR: 332 Network timeout

CMS ERROR: 340 No +CNMA expected

CMS ERROR: 500 Unknown error

CMS ERROR: 512 User abort

CMS ERROR: 513 Unable to store

CMS ERROR: 514 Invalid Status

CMS ERROR: 515 Device busy or Invalid Character in string

CMS ERROR: 516 Invalid length

CMS ERROR: 517 Invalid character in PDU

CMS ERROR: 518 Invalid parameter

CMS ERROR: 519 Invalid length or character

CMS ERROR: 520 Invalid character in text

CMS ERROR: 521 Timer expired

CMS ERROR: 522 Operation temporary not allowed

CMS ERROR: 532 SIM not ready

CMS ERROR: 534 Cell Broadcast error unknown

CMS ERROR: 535 Protocol stack busy

本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/xqhrs232/archive/2010/01/20/5216955.aspx

Here's a list of all of the "+CMS ERROR" codes for the GSM modem
interface ... they can be found defined in the ETSI GSM specs. I figure
it is worth posting as they are split between the GSM 07.05, GSM 03.40
and GSM 04.11 specs, and I frequently have to look this up for support
incidents. (So if nothing else, I'll be able to search out here to find
the list.)

CMS ERROR code list (GSM Modem error codes):

1 - "Unassigned (unallocated) number"
This cause indicates that
the destination requested by the Mobile Station cannot be reached
because, although the number is in a valid format, it is not currently
assigned (allocated).

8 - "Operator determined barring"
This cause indicates that the
MS has tried to send a mobile originating short message when the MS's
network operator or service provider has forbidden such transactions.

10 - "Call barred"
This cause indicates that the outgoing call
barred service applies to the short message service for the called
destination.

21 - "Short message transfer rejected"
This cause indicates that
the equipment sending this cause does not wish to accept this short
message, although it could have accepted the short message since the
equipment sending this cause is neither busy nor incompatible.

27 - "Destination out of service"
This cause indicates that the
destination indicated by the Mobile Station cannot be reached because
the interface to the destination is not functioning correctly. The term
"not functioning correctly" indicates that a signalling message was
unable to be delivered to the remote user; e.g., a physical layer or
data link layer failure at the remote user, user equipment off-line,
etc.

28 - "Unidentified subscriber"
This cause indicates that the
subscriber is not registered in the PLMN (i.e. IMSI not known).

29 - "Facility rejected"
This cause indicates that the facility
requested by the Mobile Station is not supported by the PLMN.

30 - "Unknown subscriber"
This cause indicates that the
subscriber is not registered in the HLR (i.e. IMSI or directory number
is not allocated to a subscriber).

38 - "Network out of order"
This cause indicates that the network
is not functioning correctly and that the condition is likely to last a
relatively long period of time; e.g., immediately reattempting the
short message transfer is not likely to be successful.

41 - "Temporary failure"
This cause indicates that the network is
not functioning correctly and that the condition is not likely to last a
long period of time; e.g., the Mobile Station may wish to try another
short message transfer attempt almost immediately.

42 - "Congestion"
This cause indicates that the short message
service cannot be serviced because of high traffic.

47 - "Resources unavailable, unspecified"
This cause is used to
report a resource unavailable event only when no other cause applies.

50 - "Requested facility not subscribed"
This cause indicates
that the requested short message service could not be provided by the
network because the user has not completed the necessary administrative
arrangements with its supporting networks.

69 - "Requested facility not implemented"
This cause indicates
that the network is unable to provide the requested short message
service.

81 - "Invalid short message transfer reference value"
This cause
indicates that the equipment sending this cause has received a message
with a short message reference which is not currently in use on the
MS-network interface.

95 - "Invalid message, unspecified"
This cause is used to report
an invalid message event only when no other cause in the invalid message
class applies.

96 - "Invalid mandatory information"
This cause indicates that
the equipment sending this cause has received a message where a
mandatory information element is missing and/or has a content error (the
two cases are indistinguishable).

97 - "Message type non-existent or not implemented"
This cause
indicates that the equipment sending this cause has received a message
with a message type it does not recognize either because this is a
message not defined or defined but not implemented by the equipment
sending this cause.

98 - "Message not compatible with short message protocol state"
This
cause indicates that the equipment sending this cause has received a
message such that the procedures do not indicate that this is a
permissible message to receive while in the short message transfer
state.

99 - "Information element non-existent or not implemented"
This
cause indicates that the equipment sending this cause has received a
message which includes information elements not recognized because the
information element identifier is not defined or it is defined but not
implemented by the equipment sending the cause. However, the information
element is not required to be present in the message in order for the
equipment sending the cause to process the message.

111 - "Protocol error, unspecified"
This cause is used to report a
protocol error event only when no other cause applies.

127 - "Interworking, unspecified"
This cause indicates that there
has been interworking with a network which does not provide causes for
actions it takes; thus, the precise cause for a message which is being
send cannot be ascertained.

0...127 - Other values in this range are reserved, defined by GSM
04.11 Annex E-2 values

128 - Telematic interworking not supported x
129 - Short message
Type 0 not supported x x
130 - Cannot replace short message x x
143
- Unspecified TP-PID error x x
144 - Data coding scheme (alphabet)
not supported x
145 - Message class not supported x
159 -
Unspecified TP-DCS error x x
160 - Command cannot be actioned x
161
- Command unsupported x
175 - Unspecified TP-Command error x
176
- TPDU not supported x x
192 - SC busy x
193 - No SC
subscription x
194 - SC system failure x
195 - Invalid SME
address x
196 - Destination SME barred x
197 - SM
Rejected-Duplicate SM x
198 - TP-VPF not supported X
199 - TP-VP
not supported X
208 - SIM SMS storage full x
209 - No SMS
storage capability in SIM x
210 - Error in MS x
211 - Memory
Capacity Exceeded X
212 - SIM Application Toolkit Busy x x
255 -
Unspecified error cause

128...255 - Other values in this range are reserved, defined by GSM
03.40 subclause 9.2.3.22 values

300 - ME failure
301 - SMS service of ME reserved
302 -
operation not allowed
303 - operation not supported
304 -
invalid PDU mode parameter
305 - invalid text mode parameter
310
- SIM not inserted
311 - SIM PIN required
312 - PH-SIM PIN
required
313 - SIM failure
314 - SIM busy
315 - SIM wrong
316
- SIM PUK required
317 - SIM PIN2 required
318 - SIM PUK2
required
320 - memory failure
321 - invalid memory index
322
- memory full
330 - SMSC address unknown
331 - no network
service
332 - network timeout
340 - no +CNMA acknowledgement
expected
500 - unknown error

256...511 - Other values in this range are reserved

512... - manufacturer specific

17 - "Network failure".
This cause is sent to the MS if the MSC
cannot service an MS generated request because of PLMN failures, e.g.
problems in MAP.

22 - "Congestion".
This cause is sent if the service request
cannot be actioned because of congestion (e.g. no channel, facility
busy/congested etc.).

22 - "Memory capacity exceeded".
This cause indicates that the
mobile station cannot store the incoming short message due to lack of
storage capacity.

Note that error "22" is defined twice. It is likely that "CMS ERROR
22" would be due to the first definition, while the second definition is
likely to only be a status code for delivery reports.

本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/Rookie_CEO/archive/2009/12/30/5097035.aspx