意大利METAL-WORK气缸:Mini-cylinder Series "ISO 6432" ?8?5 mm and Accessories
Mini-cylinders to ISO 6432 are available in various versions with a wide range of accessories:
|  |
| TECHNICAL DATA | Polyurethane | NBR | Viton?/font> |
| Operating pressure | max 10 bar (max 1 MPa) | ||
| Temperature range | –10癈?80癈 | –10癈?80癈 | –10癈?150癈 (non-magnetic cylinders) |
| Fluid | Unlubricated air. Lubrication, if used, must be continuous | ||
| Bores | ?; ?0; ?2; ?6; ?0, ?5; | ||
| Design | Threaded heads | ||
| Standard strokes | Single-acting: for bores ??5 strokes from 0 to 50 mm | ||
| Double-acting: for bores ??0 strokes from 0 to 100 mm for bores ?2?6 strokes from 0 to 200 mm for bores ?0?5 strokes from 0 to 500 mm | |||
| Double-acting, cushioned: for bores ?6 strokes from 0 to 300 mm for bores ?0?5 strokes from 0 to 500 | |||
| Versions | Double-acting, Double-acting cushioned, Single-acting retracted piston rod, Through-rod, Through-rod cushioned, Version with piston rod block. | ||
| Magnet for sensors | All versions come complete with magnet. Supplied without magnet on request. | ||
| Inrush pressure | ? to ?2: 0.8 bar - ?6 to ?5: 0.6 bar | ||
| Forces generated at 6 bar thrust/retraction | ?8: 28N / 22N ?10: 44N / 37N ?12: 64N / 50N ?16: 108N / 95N ?20: 169N/148N ?25: 265N / 228N | ||
| COMPONENTS | |
|  |
| KEY TO CODES | ||||||||||||||
| CIL | 1 | 1 | 2 | 0 | 16 | 0 | 0 | 2 | 0 | C | P | |||
| TYPE | DIAMETER | STROKE | P | polyurethane | ||||||||||
| 101 | SE axial coupling | O | Standard | 8 | ?8?0 stroke 0-100 mm | C | C40 | N | NBR | |||||
| 102 | DE axial coupling | U | Bronze rear | 10 | ?12?6 stroke 0-200 mm | chrome- | V | Viton?/font> | ||||||
| 104 | SE through-rod | head bushing | 12 | ?20?5 stroke 0-500 mm | plated | |||||||||
| 106 | SE cushioned | Without | 16 | piston rod | ||||||||||
| 109 | DEA | head mut | 20 | X | stainless | |||||||||
| 110 | DE | V | Non- | 25 | steel piston rod | |||||||||
| 111 | SE | magnetic | ||||||||||||
| 112 | DEM | S | ||||||||||||
| 113 | DEMA | |||||||||||||
| 114 | DEM through-rod | |||||||||||||
| 115 | DEMA through-rod | |||||||||||||
| 116 | DEM | |||||||||||||
| for mechanical lock | ||||||||||||||
| 117 | DEMA | |||||||||||||
| for mechanical lock | ||||||||||||||
| DE: | Double-acting (non-cushioned, not magnetic) | |||||||||||||
| DEM: | Magnetic double-acting (non-cushioned) | |||||||||||||
| DEMA: | Magnetic double-acting (cushioned) | |||||||||||||
| DEA: | Cushioned double-acting (non-magnetic) | |||||||||||||
| SE: | Single-acting (magnetic) | |||||||||||||
| N.B.: For cylinders ?8 to 10, standard stainless steel piston rod. | ||||||||||||||
公司：盈鑫国际发展有限公司
E-mail：yx105@yahoo.cn
QQ：774538830
MSN：yx105@hotmail.com
电话：0086-(0592)5327657
传真：0086-(0592)5327837
联系人：陈亦成 先生
/1 
文章评论（0条评论）
登录后参与讨论