 

AmaziotIOT牛牛

文章：209 阅读：32391 评论：4 赞：131

 好友  私信个人主页

文章 209
原创 0
阅读 32391
评论 4
赞 131

原创物联网中RTU的AI是什么？如何实现AI相关软件功能？

 2024-9-29 15:23  139 0 分类: 物联网

概述

DO 即模拟输入（AI, Analog Input），用于读取连续变化的信号，如温度、湿度、压力等。模拟输入可以接收一定范围内的电压或电流信号，并将其转换为数字值。

相关技术描述

采集 4-20mA（可选 0-5V）信号。下图为一种硬件设计方案

一般仪器仪表的信号电流都为4mA-20mA，指最小电流为4mA,最大电流为20mA 。

传输信号时候，要考虑到导线上也有电阻，如果用电压传输则会在导线的产生一定的压降，那接收端的信号就会产生一定的误差了！所以使用电流信号作为变送器的标准传输！

那么为什么选择4mA-20mA而不是0mA-20mA呢？4ma而不是0ma是用来检测线路开路的，如果0是最小，那么开路故障就检测不到了

可将采集值转换为实际测量值，支持校准
可设置多项采样、报警（如设置上下限报警值）
与数据上报参数
支持连接及断开状态检测
双重数字滤波器抗噪
采样频率：33Hz

采样频率（Sampling Frequency）是指在单位时间内从连续信号中提取并组成离散信号的采样个数，通常用赫兹（‌Hz）来表示。它是数字信号处理中的一个重要概念，用于将模拟信号转换为数字信号。

10 位精度

10位ad转换就是把模拟信号比如5v的电压转换成10位的数字信号1111111111.来表示.那么0v的模拟信号用数字量表示就是0000000000.精度其实就是分辨率即指数字量变化一个最小量时模拟信号的变化量.所以这里的精度应该是5/2^10

应用场景

3.1 水泵

云端通过控制DO输出高低电平，来控制外围电路，进而控制水泵的启停。

3.2 风扇

同理，云端通过控制DO输出高低电平，来控制外围电路，进而控制风扇的启停。

3.3 报警灯

结合DTU的DI功能，如果检测到了DI异常信号输入，DTU可以控制连接DO的报警灯报警。

DO组件的使用

1 Gitee链接地址

组件位于amaziot_bloom_os_sdk\libraries\am\xtu\am_aic

Gitee源码地址：https://gitee.com/ning./hongdou

Github源码地址：https://github.com/ayumid/hongdou

2 应用层组件功能介绍

提供AI实现实例。

使用该组件，必须同时使用AT组件，文件组件，TCP组件，掉线组件，掉线重连组件，DI组件，DO组件，AI组件，JSON组件，CLK组件。

3 代码讲解

1 dtu_ai_read

读adc值，提供给调用函数计算外接信号电流

C++
/**
* Function : dtu_ai_read
* Description : 读adc值，提供给调用函数计算外接信号电流
* Input :
*
* Output :
* Return :
* Auther : zhaoning
* Others :
**/
UINT16 dtu_ai_read(void)
{
UINT16 ul_adc_value = 0;
UINT32 ul_adc_temp = 0;
UINT16 adc_temp[DTU_AI_AVG_MAX_NUM] = {0};
int i = 0;

//平均值滤波
for(i = 0; i < DTU_AI_AVG_MAX_NUM; i++)
{
adc_temp = SDK_READ_ADC_VALUE_NEW(0, 1);
ul_adc_temp += adc_temp;
ms10leep(1);
}
ul_adc_value = ul_adc_temp / DTU_AI_AVG_MAX_NUM;
printf("SDK_READ_ADC_VALUE 0 adcValue %d\n", ul_adc_value);

return ul_adc_value;
}

2 dtu_ai_report_timer_callback

主动上报回调函数，判断当前是否在透传模式，发送消息给JSON任务，上报到服务器

C++
/**
* Function : dtu_ai_report_timer_callback
* Description : 主动上报回调函数，判断当前是否在透传模式，发送消息给JSON任务，上报到服务器
* Input :
*
* Output :
* Return :
* Auther : zhaoning
* Others :
**/
static void dtu_ai_report_timer_callback(UINT32 tmrId)
{
DTU_JSON_MSG_T ai_send_msg = {0};
// printf("dtu_do1_report_timer_callback\n");
DTU_UART_PARAM_T* dtu_uart_ctx = NULL;
DTU_FILE_PARAM_T* dtu_file_ctx = NULL;

dtu_uart_ctx = dtu_get_uart_ctx();
dtu_file_ctx = dtu_get_file_ctx();

// printf("dtu_gnss_timer_callback");
//判断是否是在透传模式
if(dtu_uart_ctx->uart_mode == DTU_DATA_MODE)
{
// if(DTU_AI_REPORT_INITIATIVE == dtu_file_ctx->ai.ai_res_rule)
// {
ai_send_msg.msgId = DTU_AI_MSG_ID_AI_PROACTIVE_REPORT;
// }
// else if(DTU_AI_REPORT_TRIGGER == dtu_file_ctx->ai.ai_res_rule)
// {
// ai_send_msg.msgId = DTU_AI_MSG_ID_AI_TRIGGER_REPORT;
// }

dtu_json_task_send_msgq(&ai_send_msg);
}
}

3 dtu_ai1_report_timer_start

开始AI周期上报定时器

C++
/**
* Function : dtu_ai1_report_timer_start
* Description : 开始AI周期上报定时器
* Input :
*
* Output :
* Return :
* Auther : zhaoning
* Others :
**/
void dtu_ai1_report_timer_start(UINT32 time)
{
UINT32 uc_time = 0;

uc_time = time;

OSATimerStop(dtu_ai_report_timer_ref);
// printf("start type timer %d\n", uc_time);
//开启定时器
OSATimerStart(dtu_ai_report_timer_ref, uc_time * 200, uc_time * 200, dtu_ai_report_timer_callback, 0);
}

4 dtu_ai1_report_timer_stop

停止AI周期上报定时器

C++
/**
* Function : dtu_ai1_report_timer_stop
* Description : 关闭AI周期上报定时器
* Input :
*
* Output :
* Return :
* Auther : zhaoning
* Others :
**/
void dtu_ai1_report_timer_stop(void)
{
OSATimerStop(dtu_ai_report_timer_ref);
}

5 dtu_ai_times_init

AI主动上报定时器创建，根据NV项判断是否打开周期上报定时器

C++
/**
* Function : dtu_ai_times_init
* Description : AI主动上报定时器创建，根据NV项判断是否打开周期上报定时器
* Input :
*
* Output :
* Return :
* Auther : zhaoning
* Others :
**/
void dtu_ai_times_init(void)
{
int ret = 0;
DTU_FILE_PARAM_T* dtu_file_ctx = NULL;

dtu_file_ctx = dtu_get_file_ctx();

ret = OSATimerCreate(&dtu_ai_report_timer_ref);
ASSERT(ret == OS_SUCCESS);

if(DTU_AI_REPORT_NONE != dtu_file_ctx->ai.ai_type)
{
if(dtu_file_ctx->ai.ai_interval >= 10)
{
//打开周期上报定时器
dtu_ai1_report_timer_start(dtu_file_ctx->ai.ai_interval);
}
}
}

4 Demo实战

4.1 创建一个Demo

复制20.9_di_xtu示例工程，到同一个文件夹下，修改文件名为20.11_ai_xtu，如图：

4.2 修改makefile

增加文件组件所在目录头文件路径，和源文件路径，以及一些宏定义，如图：

-D是makefile中定义宏定义必要的前缀，可以搜索相关makefile学习文章学习相关知识。

DTU_BASED_ON_TCP 表示当前是TCP模式，当前组件使用需要am.h中包含一些对应。

DTU_TYPE_5X6 表示使用SOM板贴片5x6卡，可以使用其它卡，修改为对应宏定义就可以。

DTU_UART_115200_BAUD 表示使用115200波特率

DTU_TYPE_JSON_INCLUDE 表示把JSON功能包含进来

4.3 增加头文件

使用代码编辑器，将新建的工程文件加入代码编辑器中，打开main.c，修改main.c，加入am.h头文件，如图：

4.4 修改代码

示例使用的是板载5x6卡，用户的硬件可能是使用外置卡，或者是三合一全网通卡，因为硬件上三种卡使用的模组SIM卡接口不一样（外置卡SIM1，5x6卡和三合一卡SIM2），所以，需要通过一个全局变量来制定SIM卡硬件接口。

extern外部变量SDK_INIT_SIM_SELECT_VALUE，这里判断了是否使用外置卡，这个宏定义在Makefile里面定义。

在Phase1Inits_enter中，宏定义判断是否要包含对SDK_INIT_SIM_SELECT_VALUE变量的修改。

在Phase2Inits_exit 调用文件组件提供的对外API，如图：

4.5 编译

在SDK根目录打开命令行，输入命令.\build.bat -l .\amaziot_bloom_os_sdk\sample\libraries\20.11_ai_xtu\

C++
PS F:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08
λ .\build.bat -l .\amaziot_bloom_os_sdk\sample\libraries\20.11_ai_xtu\
子目录或文件 out\bin 已经存在。
子目录或文件 build\cJSON 已经存在。
子目录或文件 build\obj 已经存在。
gnumake: Entering directory `F:/3.asr-b/cat.1-asr1606/1.software/BLOOM_OS_1606_OPENCPU_1191_A08/amaziot_bloom_os_sdk/sample/libraries/20.11_ai_xtu'
armcc.exe -c --cpu Cortex-R4 --no_unaligned_access -g -O2 --apcs /inter --diag_suppress 2084,1,2,177,188,223,550,1296,2795,6319,9931,9933 --diag_error=warning --gnu --thumb --loose_implicit_cast -DDATA_COLLECTOR_IMPL -DISPT_OVER_SSP -DDIAG_SSP_DOUBLE_BUFFER_USE_DYNAMIC_ALLOCATION -DENV_XSCALE -DL1_DCXO_ENABLED -DLTE_HIGH_MOBILITY_OPTIMIZATION -DRUN_XIP_MODE -DCRANE_Z2 -DCA_LONG_IPC_MSG -DNEZHA3 -DNEZHA3_1826 -DUPGRADE_PLMS -DUPGRADE_PLMS_SR -DLTE_GSMMULTIBCCH -DGPLC_LTE_RSSI_SCAN -DL1V_NEW_RSSI -DUPGRADE_PLMS_3G -DUPGRADE_PLMS_L1 -DUPGRADE_FG_PLMS -DFG_PLMS_URR -DUPGRADE_L1A_FG_PLMS -DUPGRADE_PLMS_STAGE_2 -DUPGRADE_MBCCH -DMULTI_BCCH_READY_IND -DURR_MRAT_ICS_SEARCH -DUPGRADE_ICS -DMRAT_NAS -DUPGRADE_PLMS_SEARCH_API -DICS_MBCCH -DICS_MBCCH_2G_RSSI -DDIAG_NEWPP -DPHS_SW_DEMO -DPHS_SW_DEMO_TTC -DPHS_SW_DEMO_TTC_PM -DFULL_SYSTEM -D_DDR_INIT_ -D_TAVOR_HARBELL_ -DUPGRADE_ARBEL_PLATFORM -D_TAVOR_B0_SILICON_ -DTDL1C_SPY_ENABLE -DDLM_TAVOR -DTAVOR -DFLAVOR_DUALCORE -DDEBUG_D2_MOR_REG_RESEREVED_ENABLE -D_DIAG_USE_COMMSTACK_ -D_TAVOR_DIAG_ -DPM_DEBUG_MODE_ENABLED -DPM_D2FULL_MODE -DPM_EXT_DBG_INT_ARR -DFEATURE_WB_AMR_PS -DMACRO_FOR_LWG -DHL_LWG -DOPTIMIZE_FOR_2G_BCCH -DPLAT_TEST -D_FDI_USE_OSA_ -DPLAT_USE_THREADX -DLWIP_IPNETBUF_SUPPORT -DCRANE_MCU_DONGLE -DAT_OVER_UART -DPHS_SW_DEMO_TTC_PM -DUPGRADE_LTE_ONLY -DEXT_AT_MODEM_SUPPORT -DLTEONLY_THIN_SINGLE_SIM -DLFS_FILE_SYS -DLFS_FILE_SYS_V2 -DPSM_ENABLE -DNO_PAHO_MQTT -DNO_XML -DNO_LWM2M -DREMOVE_MBEDTLS -DNO_AT_NET -DCRANE_SD_NOT_SUPPORT -DNTP -DYMODEM_EEH_DUMP -DENABLE_DM_LTEONLY -DLTEONLY_THIN -DNO_EXTEND_MY_Q_AT -DNOT_SUPPORT_HTTPS -DNOT_SUPPORT_PM813 -DCRANEL_4MRAM -DREMOVE_PB -DUART_NEW_VERSION -DREMOVE_MEP -DREMOVE_SMS -DREMOVE_ENVSIM -DAPN_INCODE -DLTEONLY_THIN_SINGLE_SIM_2MFLASH -DASR160X_OPENCPU_FEATURE -DENABLE_UART3_FEATRUE -DENABLE_UART4_FEATRUE -DYUGE_MBEDTLS_3_2_1 -DENABLE_MAC_TX_DATA_LOGGING -DDISABLE_NVRAM_ACCESS -DINTEL_UPGRADE_EE_HANDLER_SUPPORT -DLTE_W_PS -DL1_DUAL_MODE -DUPGRADE_HERMON_DUAL -DINTEL_UPGRADE_DUAL_RAT -DINTEL_UPGRADE_GPRS_CIPHER_FLUSH -DUPGRADE_ENHANCED_QUAD_BAND -DINTEL_2CHIP_PLAT -DI_2CHIP_PLAT -DUPGRDE_TAVOR_COMMUNICATION -DRUN_WIRELESS_MODEM -DFLAVOR_DDR12MB_GB1MB5 -DFEATURE_SHMEM -DACIPC_ENABLE_NEW_CALLBACK_MECHANISM -DRELIABLE_DATA -DMAP_NSS -DTV_FNAME="\"SW_PLATFORM=PMD2NONE PHS_SW_DEMO PHS_SW_DEMO_PM SRCNUCLEUS FULL_SYSTEM NOACRTC PDFLT PLAT_TEST PV2 DIAGOSHMEM NVM WITHL1V\"" -DTV_FDESC="\"SW_DESCRIPTION=\"" -DENABLE_ACIPC -D_DATAOMSL_ENABLED_ -DUSB_CABLE_DETECTION_VIA_PMIC -DMIPS_TEST -DMIPS_TEST_RAM -DFLAVOR_DIET_RAM -DNVM_INCLUDE -DMSL_INCLUDE -DMSL_POOL_MEM -DNO_AUDIO -DOSA_QUEUE_NAMES -D_DIAG_DISABLE_USB_ -DOSA_NUCLEUS -DOSA_USED -DPM_D2NONE_MODE -DCRANE_SOC_TEMPERATURE_SENSOR -DL1_SW_UPDATE_FOR_DIGRF -DPHS_L1_SW_UPDATE_R7 -DUPGRADE_LTE -DFRBD_CALIB_NVM -DFRBD_AGC_CALIB -DFRBD_FDT_CALIB -DHSPA_MPR -DCAPT_PARAMS_OPTIMIZE -DL1_WB_R99_ONLY -DL1V_WB_R99_ONLY -DINTERGRATED_RF_SUPPORT -DL1_RX_DIV_SUPPORT -DENABLE_OOS_HANDLING -DTAVOR_D2_WB_L1_SUPPORT -DL1_DDR_HIGH_FREQ -DUPGRADE_DIGRF3G_SUPPORT -DW_PS_PLUS_G_PAGING -D"NO_APLP=0" -DINTEL_UPGRADE_UNIFIED_VOICE_TASK -DINTEL_UPGRADE_R99 -DAPLP_SPY_ENABLE -D__TARGET_FEATURE_DOUBLEWORD -DWHOLE_UMTS_STACK -DUSE_TTPCOM_CSR_BLUETOOTH_AUDIO_GAIN_CONTROL -DL1_UPGRADE_R5 -DUPGRADE_EDGE -DUPGRADE_R4_FS1 -DINTEL_UPGRADE_GSM_CRL_IF -DUPGRADE_EGPRS_M -DINTEL_UPGRADE_EGPRS_M -DINTEL_UPGRADE_RF_PARAMS_IN_CF_TDS -DINTEL_UPGRADE_2SAMPLES_PER_SYMBOL -D"GPRS_MULTISLOT_CLASS=12" -D"EGPRS_MULTISLOT_CLASS=12" -DMARVELL_UPGRADE_BSIC_REDESIGN -DMSL_INCLUDE -DINTEL_HERMON_SAC -DCRANE_CUST_BUILD -DL1_SW_UPDATE_FOR_DIGRF -DFLAVOR_COM -DSILICON_PV2 -DSILICON_SEAGULL -DSILICON_TTC_CORE_SEAGULL -DPCAC_INCLUDE -Otime -DBUILD_DATE="\"11 22 2023\"" -DBUILD_TIME="\"10:27:44\"" -Iatcmds\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\telephony\yuge\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\UART\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\core\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\PMU\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\GPIO\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\os\posix\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\diag\diag_logic\src -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\csw\SysCfg\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\csw\platform\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\env\win32\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\csw\BSP\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\csw\platform\dev_plat\build -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\os\osa\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\os\threadx\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\os\nu_xscale\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\psm\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\httpclient\src -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\diag\diag_logic\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\timer\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\intc\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\csw\PM\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\pm\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\TickManager\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\BSP\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\telephony\atcmdsrv\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\telephony\atparser\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\telephony\sdk\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\httpclient\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\ci\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\lwipv4v6\src\include -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\lwipv4v6\src\include\arch -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\lwipv4v6\src\include\ipv4 -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\lwipv4v6\src\include\ipv6 -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\lwipv4v6\src\include\lwip -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\lwipv4v6\src\include\netif -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\mmi_mat\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\tavor\Arbel\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\tavor\env\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\telephony\modem\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\duster\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\fota\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\I2C\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\ACIPC\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\fatsys\flash -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\FDI\src\INCLUDE -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\MMU\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\FDI\src\FDI_ADD -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\FDI\src\FM_INC -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\fatsys\fs\hdr -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\littlefs\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\tts\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\dial\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\csw_memory\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\utilities\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\commpm\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\nvm\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\EEhandler\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\EEhandler\src -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\RTC\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\telephony\ci_client\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\BT_device\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\UART\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\mrd\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\dma\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\softutil\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\SPI\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\websocket\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\atnet_srv\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\softutil\fotacomm\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\aud_sw\Audio\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\aud_sw\ACM_COMM\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\aud_sw\audio_stub\src -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hop\aam\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\aud_sw\AudioHAL\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\hal\dbgshell\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\include\asr160x\pcac\opencpu\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\amaziot_bloom_os_sdk\utils -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\CSDK_CODE\cJSON\inc -IF:/3.asr-b/cat.1-asr1606/1.software/BLOOM_OS_1606_OPENCPU_1191_A08/amaziot_bloom_os_sdk/sample/libraries/20.11_ai_xtu\am\inc -IF:/3.asr-b/cat.1-asr1606/1.software/BLOOM_OS_1606_OPENCPU_1191_A08/amaziot_bloom_os_sdk/sample/libraries/20.11_ai_xtu\atcmds\inc -IF:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08/amaziot_bloom_os_sdk/libraries\am\xtu -DDTU_BASED_ON_TCP -DDTU_TYPE_5X6 -DDTU_UART_115200_BAUD -DDTU_TYPE_DODIAI_INCLUDE -DDTU_TYPE_JSON_INCLUDE -o build\obj/ext_at_cmds.o F:/3.asr-b/cat.1-asr1606/1.software/BLOOM_OS_1606_OPENCPU_1191_A08/amaziot_bloom_os_sdk/sample/libraries/20.11_ai_xtu/atcmds/src/ext_at_cmds.c
armlink.exe build\obj/main.o build\obj/ext_at_cmds.o build\obj/ext_at_controller.o build\obj/am_file.o build\obj/am_at.o build\obj/am_trans.o build\obj/am_hb.o build\obj/am_di.o build\obj/am_do.o build\obj/am_ai.o build\obj/am_clock.o build\obj/am_json.o build\obj/am_socket.o build\CSDK_CODE.lib \
-o F:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\out\bin\Arbel_PMD2NONE_40M.axf \
--via F:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\prebuilt_1606l\Arbel_PMD2NONE_targ_objliblist.txt \
--elf \
--scatter F:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\prebuilt_1606l\Crane_DS_4M_Ram_2M_Flash_XIP_CIPSRAM_Common_SingleSIM.sct \
--predefine="-DLTEONLY_THIN_SINGLE_SIM" --map --symbols --info sizes,totals \
--list F:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\out\bin\Arbel_PMD2NONE_40M.map \
--keep init.o(Header) --keep init.o(Vectors) --diag_suppress 6312,6314,6319,6329 \
--feedback F:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\out\feedbackLinkOptLteonlyThin_SingleSim_NoSMS.txt
F:\3.asr-b\cat.1-asr1606\1.software\BLOOM_OS_1606_OPENCPU_1191_A08\tools\buildimage_1606l.bat
SDK_PROD_TYPE : [DM]
SDK_CUST_SKU : [THIN_SINGLE_SIM_NO_SMS]
SDK_PS_MODE : [LTEONLY]
SDK_CHIP_VER : [Z2A0]
SDK_OS_TYPE : [TX]
Platform Convertion Tools v4.01 with PS option extension
Convertion done!
|INPUT |out\bin\cp_1606L.bin
|MARK |NAME |EXEADDR .LOADADDR.LENGTH .CPZLADDR|COMPRESS STASTIC |
|--------|--------|--------.--------.--------.--------|------------------------------|
|This Is LteOnly 4M|
|RW_CPZ_1|DDR_RW_ |7e11c000.8006cd70.0000d40c.8006d000|0000d40c->00003000
|This Is LteOnly 4M|
|RW_CPZ_2|PS_NCAH |7e388000.8007a17c.00001300.80070000|00001300->00001000
|This Is LteOnly 4M|
|RW_CPZ_3|ITCM |7e3dac00.8007b47c.0000f51c.80071000|0000f51c->0000a000
|This Is LteOnly 4M|
|RW_CPZ_4|CODE_PS |7e1ad000.8008a998.0002fcdc.8007b000|0002fcdc->0001e000
|This Is LteOnly 4M|
|RW_CPZ_5|CODEPSB |7e1df000.800ba674.000339c0.80099000|000339c0->0001b000
|This Is LteOnly 4M|
|RW_CPZ_6|CODEPSC |7e216000.800ee034.000323ec.800b4000|000323ec->0001b000
|This Is LteOnly 4M|
|RW_CPZ_7|CODEPSD |7e24c000.80120420.00028d88.800cf000|00028d88->0001a000
|This Is LteOnly 4M|
|RW_CPZ_8|CODEPSE |7e27a000.801491a8.0002e310.800e9000|0002e310->0001a000
|This Is LteOnly 4M|
|RW_CPZ_9|CODEPSF |7e2ac000.801774b8.0001c948.80103000|0001c948->00011000
|This Is LteOnly 4M|
|RW_CPZ_A|CODE_PL |7e2cd000.80193e00.0002f914.80114000|0002f914->0001e000
|This Is LteOnly 4M|
|RW_CPZ_B|CODEPLB |7e2fd000.801c3714.00038d38.80132000|00038d38->00021000
|This Is LteOnly 4M|
|RW_CPZ_C|CODEPLC |7e337000.801fc44c.000268d4.80153000|000268d4->00012000
|--------|--------|--------.--------.--------.--------|------------------------------|
| | 0x0020bd20 -> 0x0014e000|
| | 2.046(MB) -> 1.305(MB)|
|------------------------------------------------------------------------------------|
cp_1606L.axf
cp_1606L.bin
cp_1606L.map
gnumake: Leaving directory `F:/3.asr-b/cat.1-asr1606/1.software/BLOOM_OS_1606_OPENCPU_1191_A08/amaziot_bloom_os_sdk/sample/libraries/20.11_ai_xtu'
"copy NEZHAC_CP_CNR_MIFI_TX.bin to ./ "

已复制 1 个文件。

4.6 生成固件

参考入门中开发工具，生成工具。

4.7 查看现象

固件下载到模组后，发送DI 配置AT指令，观察AT串口信息，

Plain Text
[11-22 10:41:46:904]\0\0
[11-22 10:41:50:690]RDY
[11-22 10:42:00:900]
[11-22 10:42:00:900]OK
[11-22 10:42:03:371]
[11-22 10:42:03:371]AT+AICFG=0,2,19,10,10
[11-22 10:42:03:371]
[11-22 10:42:03:371]OK
[11-22 10:42:09:811]
[11-22 10:42:09:811]+AICFG:0,2,19,10,10
[11-22 10:42:09:811]
[11-22 10:42:09:811]OK
[11-22 10:42:12:505]
[11-22 10:42:12:505]+AIRD:0.04
[11-22 10:42:12:505]
[11-22 10:42:12:505]OK