原创意大利METALWORK气缸/METAL-WORK气动

 2007-11-16 15:51  1035 7 7 分类: 工业电子

意大利METALWORK气缸/METAL-WORK气动：Cylinder Series "ISO 6431 VDMA" ?32?25 mm

Cylinders made to ISO 6431 VDMA available in various versions and with a wide range of accessories:

TECHNICAL DATA	Polyurethane	NBR	Viton?/font>
Operating pressure	max 10 bar (max 1 MPa - 145 psi)
Temperature range ?32 ?63	–20癈?80癈 (non-magnetic cyl.) –10癈?70癈 (magnetic cyl.)	–20癈?80癈 (non-magnetic cyl.) –10癈?70癈 (magnetic cyl.)	–10癈?150?(non-magnetic cyl.)
?80 ?125	–10癈?80癈 (non-magnetic cyl.) –10癈?70癈 (magnetic cyl.)	–10癈?80癈 (non-magnetic cyl.) –10癈?70癈 (magnetic cyl.)	–10癈?150?(non-magnetic cyl.)
Fluid	Unlubricated air. Lubrication, if used, must be continuous
Bore	?32 ; ?40 ; ?50 ; ?63 ; ?80 ; ?100 ; ?125
Design	Heads with Tap Tite screws
Standard stroke	Single-acting: for bores ?32?3, strokes 0-250 mm
	Double-acting: for bores ?32?0, strokes 25-2800 mm for bores ?100?25, strokes 25-2600 mm
Versions	Double-acting cushioned, Single-acting retracted piston rod cushioned, Through-rod cushioned, Long cushioning, High-temperature, Piston rod lock, Sound-proofed, Oil seal, Through-rod oil seal, Low friction, Non-stick-slip.
Sensor magnet	All versions come complete with magnet. Supplied without magnet on request.
Inrush pressure	?32; 40: 0.4 bar ?50;63 strokes < 1500 mm: 0.3 ?80;100;125 strokes < 1500 mm: 0.2 bar; strokes > 1500 mm: 0.4 bar
Forces generated at 6 bar thrust/retraction	?32: 434N / 373N ?63: 1683N / 1516N ?125: 6626N / 6210N	?40: 678N / 565N ?80: 2714N / 2460N	?50: 1060 / 893N ?100: 4241N / 3985N

COMPONENTS

PISTON ROD: C40 steel or stainless steel, thick chromed
HEAD: die cast aluminium, fully machined
PISTON ROD GASKET: polyurethane (PARKER PRADIFA), NBR or Viton?
GUIDE BUSHING: steel strip with bronze and PTFE insert
JACKET: drawn anodised calibrated aluminium
HALF-PISTON: self-lubricating technopolymer with built-in cushioning olives (aluminium with PTFE pad for diameters 80-100-125)
PISTON GASKET: polyurethane (PARKER PRADIFA), NBR or Viton?
MAGNET: plastoferrite
Static O-rings: NBR or Viton?
CUSHIONING GASKET: polyurethane (PARKER PRADIFA), NBR or Viton?
CUSHIONING NEEDLE: OT 58 with needle out movement safety system even when fully open
SCREWS: Tap Tite for assembly