原创代理METAL-WORK电磁阀

 2007-11-16 16:24  1950 7 7 分类: 工业电子

代理METAL-WORK电磁阀：Mach 16 valves

Available in size 1/8” only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The MACH 16 valves is a typical small size valve, only 16 mm wide, with excellent performance, 750 Nl/min flow rate at 6 bar, 蠵 1 bar. The valve can be used in line, on a panel, or on a base (multiple or manifold). This MACH design is the result the miniaturisation concept with the same durability, sturdiness and reliability.

TECHNICAL DATA
Valve port thread	1/8’’
Type of pilot	Pneumatic actuation M5 - Solenoid actuation with integrated coil
Max. outer diameter of fittings for ports 1, 3, 5	15 mm
Max. outer diameter of ports 2-4	15 mm
Operating temperature	–10癈?60癈
Minimum actuation pressure	Monostable with pneumatic spring
Pilot - pneumatic controls	1.6 bar for monostable valves with mechanical spring 0.9 bar for bistable valves - 1.9 bar for 5/3 valves
Max. operating pressure	10 bar
Fluid	Filtered lubricated or unlubricated compressed air; lubrication if used must be continuous
Recommended lubricant	ISO and UNI FD 22
Number of ways in base	1-3-5 and Pilot Exhaust
Screws for wall-mounting single valve	2 M3 screws
Screws for base-mounting valve	2 M2.5x30 screws
Installation	In any position (vertical mounting is not recom-mended for bistable valves subjected to vibration).
Response times (TRA) at 6 bar during actuation (m/sec.)	12 ms (5/2 monost.) ?8 ms (5/2 bistable) 23 ms (5/3 valve)
Response times (TRA) at 6 bar repositioning (m/sec.)	26 ms (5/2 monost.) ?22 ms (5/2 bistable) 21 ms (5/3 valve)
Conductance C NI/min bar	149.8 (5/2 valves) ?63.4 (5/3 valves)
Critical ratio b bar/bar	0.525 (5/2 valves) ?.491 (5/3 valves)