原创 WiFi 部分调试完成

IP Camera的项目：

WiFi 采用威盛的VNT6656AU，usb接口，驱动给了；

修改了驱动源代码，编进内核后，启文件系统，插入WiFi模块后，出现的信息是：

mx27# usb 1-1: new full speed USB device using fsl-ehci and address 2
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: configuration #1 chosen from 1 choice
VIA Networking Wireless LAN USB Driver Ver. 1.13
Copyright (c) 2004 VIA Networking Technologies, Inc.

mx27# ifconfig eth1 192.168.4.2
Zone=[2][E][U]!!
mx27# AP(BSS) finding:Found a AP(BSS)..
802.11 Authen (OPEN) Successful.
Association Successful, AID="77".
Link with AP(SSID): BOHUINET1

如果想点对点连结就要修改其脚本 sta。wlan 由infra改为adhoc，然后就可以点对点的进行传输啦

mx27#./sta.wlan

mx27# ./wetctl eth1 link

mx27#./v4l.sh

就可以通过无线传输摄像头的数据到PC。成功