Squeezing a Transmission LineSqueezing a Transmission Line While Maintaining its Length You can modify an existing transmission line to squeeze it into a smaller space, specifying several characteristics in the process, such as corner type, lead length and minimum spacing. You can adjust any or all of the following characteristics as needed: Corner Type--Select from Mitered, Square, Curve Ending Direction--The direction (clockwise or counterclockwise) in which the last two segments connected to the ending lead are drawn Minimum Spacing--The minimum spacing between the parallel trace segments Mitered Corner Cutoff Ratio (%)--The desired cutoff ratio for the corner type Mitered Curve Radius--The desired curve radius for the corner type Curve Lead Length--The length of the starting and ending segments To squeeze a tr……