simulation and optimization oledIDW 2002, Hiroshima, OLED Simulations Poster Simulation and Optimization of OLED Device C.R.Ou1 Wen- Jiang Yang* Q150 Optical Engine Division Industrial Technology Research Institute/OES Laboratory Hsin-Chu, Taiwan Abstract The purpose of this article is to build a research methodology for the OLED Device. ASAP is for the emitting area simulation and ANSYS is for the modeling of the OLED device structures. The overall characteristic of the OLED device can be examined through this research method. We did not discuss the optimization of the material of the OLED. The refractive index is the function of the thickness of the materials, but we treat them as independent variables based on the fact that the variations are small within the fabrication range. In the following section we will intr……