Manual PRO 3_4_change settings for 3_axis controller9. November 2004 Short Manual PRO 3 / 4 Change Setting for 3-axis controller Changing the acceleration of the stages 1. Close the ImageMaster PRO software 2. Switch on the 3 axis controller “L-Step” and switch on “Auto” 3. Open the link on the desktop called “WIN-Commander” 4. Connect the 3 axis-controller to the PC by using this settings Pic. 1: Start of the software Win Commander to program the 3-axis controller TRIOPTICS GmbH Hafenstrasse 39 D-22880 Wedel, GERMANY Phone: Fax: +49-4103-18006-0 +49-4103-18006-20 e-mail: WWW: info@trioptics.com http://www.trioptics.com 5. Change the acceleration to 0.25m/s2 for all three axis. The speed of the stages is not so important. Pic. 2: change acceleration values to 0.25m/s2 6. Open hardware configuration menu for the stages Bild 3 X-/Y……