摘要：本应用笔记显示了电源产生三个隔离电压SLIC组件。隔离电源使用-24V类型学在反激式变压器，升压控制器MAX668 ， -72V输出，光耦隔离反馈信号。线性稳压器MAX8867 ，提供3.3V输出。Maxim > App Notes > Automotive Power-supply circuits
Keywords: subscriber line interface card, SLIC, boost controller, transformer flyback typology, optocoupler, shunt voltage regulator, linear Jun 14, 2002
voltage regulator
APPLICATION NOTE 1115
Isolated SLIC supply
Abstract: This application note shows a power supply that generates three isolated voltages for SLICs. The isolated power supply
uses a boost controller, the MAX668, with a transformer in flyback typology for -24V, and -72V outputs, and isolates the
feedback signal with an optocoupler. A linear voltage regulator, the MAX8867, provides the 3.3V output.
A similar version of this article appeared in the September 24, 2001 issue of EE Times magazine.
Some subscriber line interface cards (SLICs) require power-supply voltag……
