Abstract: Connecting the outputs of a 1-Wire addressable switch (DS2408) to a resistor network allows the 1-Wire interface to control a simple DAC. This idea is illustrated by the presentation of an LED-brightness controller. Maxim > App Notes > 1-Wire Devices Keywords: 1-Wire switches, 1-Wire interface, current mirrors, D/A converters, DACs, resistor networks Oct 19, 2009 APPLICATION NOTE 4627 A Simple 1-Wire DAC By: Bernhard Linke Abstract: Connecting the outputs of a 1-Wire addressable switch (DS2408) to a resistor network allows the 1-Wire interface to control a simple DAC. This idea is illustrated by the presentation of an LED-brightness controller. A similar version of this article was published on September 29, 2009 on the Planet Analog website. Among devices available with a 1-Wire interface, the best known are memories, temperature sensors, battery monitors, and addressable switches. One-Wire ADCs are also available, but no 1-Wire DACs. You can, however, build a simple 1-Wire DAC using addressa……