This Technical Brief describes how the MCP2150
Developer’s Board can be used for development of
MCP2155 applications.
The MCP2150 is designed for use in Data Terminal
Equipment (DTE) applications, while the MCP2155 is
designed for use in Data Communication Equipment
(DCE) applications. This requires some of the UART’s
non-data circuits to operate differently in these two
devices. M TB059
Using The MCP2150 Developer’s Board With The MCP2155
While the MCP2150 can be connected to the DB-9
Author: Mark Palmer connector (J5) or the interface Header (J1), the
Microchip Technology Inc. MCP2155 can only be connected via the interface
Header (J1). The DB-9 connector is useful for easily
connecting to a Host PC.
INTRODUCTION
The MCP2150 Developer’s Board layout is shown in
This Technical Brief describes ho……
