The TF-ET adaptor kit, which is used in conjunction with the ET-PMT Electrical Telecom Mask Testing package, comes with three adaptors: AP120, AP100 and PP090. Each adaptor is used to properly terminate the input signal, and is used for a specific set of standards. This Application Brief describes how to use the adaptors and to adjust the trace in order to fit it to the mask. Electrical Telecom Mask Testing: APPLICATION BRIEF TF-ET Adaptor Pinouts and Trace Alignment Tips The TF-ET adaptor kit, which is used in conjunction with the ET-PMT Electrical Telecom Mask Testing package, comes with three adaptors: AP120, AP100 and PP090. Each adaptor is used to properly terminate the input signal, and is used for a specific set of standards. This Application Brief describes how to use the adaptors and to adjust the trace in order to fit it to the mask. AP120: The AP120 is used to properly terminate E1-TP (twisted pair) signals. The adaptor has 3 inputs configured as in figure 1; use banana plugs to bring your signals and ground into the AP120. AP100: The AP100 is used to properly terminate DS-1 signals, and has an adaptor has a socket for a bantam connector. Ban……