ChecklistDesigner’s Checklist Circuit Designer Requirements Initial Planning Gather required information for part list, required component locations, and mechanical locations and requirements. Determine if all components are available in existing libraries. If not, use a component creation checklist. Select design template. Save file by part number. Enter design information. Open/load necessary libraries. Place components and wire together. Note all current, voltage, high frequency, noise and circuits. Add a note like the following for the most commonly used trace and space in the board designs: “Unless otherwise specified, all circuits are less than .25A and 30V” (this works for 6/6; .006” trace & .006” space). Place power-pin table. Place “last used” and “unused pin/gate” table. Highl……