The dsPIC30F2010 (Rev. A0) samples you have
received conform to the specifications and functionality
described in the following documents:
• DS70030 – dsPIC30F Programmer’s Reference
Manual
• DS70118 – dsPIC30F2010 Data Sheet
• DS70046 – dsPIC30F Family Reference Manual
The exceptions to the specifications in the documents
listed above are described in this section.
dsPIC30F2010 Rev A0 silicon is identified by
performing a “Reset and Connect” operation to the
device using MPLAB
®
ICD 2 within the MPLAB IDE.
The following text is visible under the MPLAB ICD 2
section in the Output window within MPLAB IDE: dsPIC30F2010
dsPIC30F2010 Rev. A0 Silicon Errata
dsPIC30F2010 (Rev. A0) Silicon Errata 4. Early Termination of Nested-DO loops
The dsPIC30F2010 (Rev. A0) samples you have When using two DO loops in a nested fashion,
received conform to the specifications and functionality terminating the inner-level DO loop by setting the
described in the following documents: EDT(CORCON) bit will produce unexpected
results.
DS70030 ……
