Errata – MPLAB-ICD Hardware
时间:2019-12-24
大小:31.93KB
阅读数:252
查看他发布的资源
资料介绍
You can put a connector on your target board to connect the MPLAB-ICD
debugger to the PIC16F87X processor on your application. The cable
connecting the MPLAB-ICD Demo Board or ICD Header to the ICD Module
has the following end plug: AMP 5-554710-3, Plug, 6-6 Strand Round
Modular Plug or equivalent. This part is available from Digikey, A9117-ND.
The pinout for the cable connector is shown in the Figure 1. MPLAB-ICD USER’S GUIDE
Errata ……
版权说明:本资料由用户提供并上传,仅用于学习交流;若内容存在侵权,请进行举报,或
联系我们 删除。