【应用笔记】一种PLD JTAG配置的嵌入式解决方案—JRunner驱动软件(The JRunner Software Driver:An Embedded Solution for PLD JTAG Configuration)
JRunner驱动软件为嵌入式配置而开发的，它可以在JTAG模式下通过ByteBlaster II或ByteBlasterMV下载线配置Altera的FPGA器件。
The JRunnerTM software driver is developed to configure Altera® FPGA
devices in JTAG mode through the ByteBlaster II or ByteBlasterMV
download cables for embedded configurations. Source code for the driver
is provided to enable you to customize the I/O control routines for your
system. The JRunner Software Driver:
An Embedded Solution for
PLD JTAG Configuration
May 2006, version 1.0 Application Note 414
Introduction The JRunnerTM software driver is developed to configure Altera FPGA
devices in JTAG mode through the ByteBlaster II or ByteBlasterMV
download cables for embedded configurations. Source code for the driver
is provided to enable you to customize the I/O control routines for your
system.
The JRunner driver supports the configuration file in ……
