MAX971 ）和光电二极管的组合被用于电视机遥控器红外（IrDA）信号检测等RC滤波器，减少环境光噪声和交流电的嗡嗡声。电路的输出可以驱动一个CMOS设置复位触发器或中断一个沉睡的微处理器。Maxim > App Notes > AMPLIFIER AND COMPARATOR CIRCUITS MISCELLANEOUS CIRCUITS Keywords: infrared sensor, infrared monitor, low supply current comparator, comparator plus reference, Oct 13, 1997 photodiode, IrDA signals, TV remote control APPLICATION NOTE 1101 IR Sensor/Monitor Wakes Host System Abstract: The combination of an ultra low supply current, comparator plus reference (MAX971) and photodiode are used to detect infrared (IrDA) signals for TV remote control, etc. RC filters reduce ambient light noise and AC mains hum. The circuit's output can drive a CMOS set-reset flip-flop or interrupt a sleeping microprocessor. The sensor/monitor circuit of Figure 1 "wakes up" the host system on detection of infrared (IR) signals. It draws so little supply current that it can rema……