The ISL9200 is an integrated circuit (IC) optimized to provide a Li-ion battery redundant safety protection from failures of a charging system. The IC monitors the input voltage, the battery voltage, and the charge current. When any of the three parameters exceeds its limit, the IC turns off an internal P-channel MOSFET to remove the power from the charging system. In addition to the above protected parameters, the IC also monitors its own internal temperature and turns off the P-channel MOSFET when the die temperature exceeds 140°C. Together with the battery charger IC and the protection module in a battery pack, the charging system using the ISL9200 has triple-level protection and is two-fault tolerant ISL9200EVAL1 Application Note Application Note November 17, 2005 AN1218.0 Author: Chuck Wong Introduction Design Specification The ISL9200EVAL1 is the evaluation board for the ISL9200 The design specifications are given in Table 1. double-fault tolerant charging system solution. The TABLE 1. DESIGN SPECIFICATIONS components for t……