资料
  • 资料
  • 专题
ISL88731EVAL2Z和ISL88731CEVAL2Z评估板安装程序
推荐星级:
时间:2019-12-24
大小:771.76KB
阅读数:107
上传用户:二不过三
查看他发布的资源
下载次数
0
所需E币
4
ebi
新用户注册即送 300 E币
更多E币赚取方法,请查看
close
资料介绍
The ISL88731 is a highly integrated Lithium-ion battery charger controller, programmable over the SMBus system management bus (SMBus). The ISL88731 is intended to be used in a smart battery charger (SBC) within a smart battery system (SBS) that throttles the charge power such that the current from the AC-adapter is automatically limited. High efficiency is achieved with a DC/DC synchronous-rectifier buck converter, equipped with diode emulation for enhanced light load efficiency and system bus boosting prevention. The ISL88731 charges one to four Lithium-ion series cells, and delivers up to 8A charge current. Integrated MOSFET drivers and bootstrap diode result in fewer components and smaller implementation area. Low offset current-sense amplifiers provide high accuracy with 10mΩ sense resistors. The ISL88731 provides 0.5% end-of-charge battery voltage accuracy. Application Note 1404 ISL88731EVAL2Z and ISL88731CEVAL2Z Evaluation Boards Setup Procedure Introduction What is Needed The ISL88731 and ISL88731C are highly integrated battery The following materials are recommended to perform testing: charger controllers for Li-ion/Li-ion polymer batteries with One AC adaptor or one adjustable 25V/6A DC power supply SMBus interface controlling charge voltage, charge current and input current limiting. The evaluation board includes a USB to Two adjustable electronic loads with constant curre……
版权说明:本资料由用户提供并上传,仅用于学习交流;若内容存在侵权,请进行举报,或 联系我们 删除。
PARTNER CONTENT
相关评论 (下载后评价送E币 我要评论)
没有更多评论了
  • 可能感兴趣
  • 关注本资料的网友还下载了
  • 技术白皮书