应用和实施输出限制功率放大器 Use and Application of Output Limiting Amplifiers (HFA1115, HFA1130, HFA1135) Application Note November 1996 AN9653 Introduction Amplifiers with internal voltage clamps, also known as limiting delivers only the 10mV error. If an input limiting amplifier amplifiers, have a wide range of practical uses. They are most becomes damaged and goes open loop, the rail-to-rail output commonly used to protect load circuitry that has a limited swing will likely take out the expensive A/D it was designed to input range. By connecting the high and low clamp pins to DC ……