RP3300无源示波器探头用户手册 Frequency Compensation You are suggested to compensate the probe to match with the oscilloscope. The probes can be adjusted for both low-frequency compensation and high-frequency compensation. Low- frequency compensation is required at its first connection with the oscilloscope and high- frequency compensation can be performed regularly. Low-frequency compensation Cable Length 1 Connect the probe to the calibration signal output terminal and signal input terminal at the front panel of the oscilloscope. 2 Set the probe attenuation ratio to 10X and press Auto at the front panel of the oscilloscope. A 1 kHz square waveform is displayed on the screen. 3 Use the adjustment tool to adju……