Here are the procedures to connect a client PC to a Scope via DCOM For the Windows 7 PC Side Setup TECHNICAL NOTE June 9, 2011 DCOM interconnection is not easy to setup. The way to do it depends on Summary the OS and version on both sides (PC and oscilloscope). It also depends on the level of visibility in an NT domain. If the scope is NOT in the same Here are the procedures to domain as the client PC, the user on the PC side should be allowed on the connect a client PC to a Scope via DCOM scope side. Therefore, a user account with the same name AND the same password as the current PC user must exist on the oscilloscope……