Stellaris DK-LM3S9B96 Development Kit provides a feature-rich development platform for Ethernet, USB OTG/Host/Device, and CAN enabled Stellaris ARM® Cortex-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The development kit contains all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly. The Stellaris DK-LM3S9B96 Development Kit features: StellarisWare® Peripheral Library, USB Library, and Graphics Library in conjunction with ARM development tools from ARM tools partners.特性Stellaris LM3S9B96 MCU with fully-integrated Ethernet, CAN, and USB OTG/Host/DeviceBright 3.5" QVGA LCD touch-screen displayNavigation POT switch and select pushbuttonsIntegrated Interchip Sound (I2S) Audio Interface8 MB SDR SDRAM module (attaches through the EPI signal breakouts)MicroSD card interfaceLM3S9B96 I/O available on labeled break-out padsARM® 10-pin JTAG debug connector with input and output modes1 GB MicroSD Card, 128 MB USB Flash DriveEthernet cable, CAN ribbon cable, USB and JTAG cables……