E1/E20常见错误
总链??
http://cn.renesas.com/support/faqs/faq_results/Q1000000-
Q9999999/tools/emulation_debugging/emulator_110601b.jsp
the MODE pin on the user system is fixed in the low state. Check the state
答：E1/E20与MCU连接电路中，MODE引脚必须通过上拉电阻连到VCC处，使该引脚处于
executed because the reset pin on the user system is in the low state.
Check the state of the reset pin.??
has occurred during the communication with the target
MCU(FFWERR_AENTRY_TMOUT).The target MCU and the selected device do not
match. Or,There may be a problem in the pin processing of the MCU etc.
Or,The emulator may have gone wrong.??
答：造成上述错误的原因有以下几种情况
E1/E20出现故障，可以运行对应的self-check 程序进行验证??
答：如果不是硬件问题，那么应该是调试软件没有安装??
信息??
setting”设置框??
重新打开[debug]->[debug
settings]，如果tar……
